Digital Dispensary

Product Sections


Best Sellers

Rebuild kit for Solex 32PBI-2 Carburettor

Rebuild kit for Solex 32PBI-2 Carburettor

66.04

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.


find out more

Screw for retaining Brake Drums

Screw for retaining Brake Drums

0.25

Application: Series 1, 2 & 3.
Description: Countersunk head screw 3/8"BSW by 5/8" long.
find out more

Acorn for HT Leads

Acorn for HT Leads

1.49

Application: Series One and Series Two. 1948 to 1961 approx.
Description: Acorn nut for retaining high tensions leads to distributor caps and plug caps. Use with 217279 brass washers and copper cored high tension cable.
Approximate dimensions: height 24mm(0.95"), overall diameter 15.4mm(0.6"), thread diameter 12.5mm(0.5")
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Seal Kit - front wheel cylinders

Seal Kit - front wheel cylinders

3.00

Application: Series 1, 2 & 3.
Description: Replacement seal kit for pair of 1.25" bore wheel cylinders. Contains 4 cup seals for pistons, 4 dust seals for cylinder ends and 2 dust caps for bleed screws. Suits cylinders 243296 and 243297.
find out more

Inner Wheel Hub Seal

Inner Wheel Hub Seal

4.28

Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:   <<   <  1  2  3   >   >>
Dual Fuel Pump Ref: AZX1501
Application: Series 2A with 2.6ltr 6cylinder petrol(gasolene) engine, also early Series 3 upto suffix B with the same engine.

Description: New SU double ended fuel pump.

PLEASE NOTE: these pumps are only made in small batches and consequently delivery time may be several weeks or even months!

Price: 195.75 (234.90 Including VAT at 20%)



Dual Fuel Pump
Replacement Electric Fuel Pump - PRC3901 Ref: PRC3901
Facet electric petrol pump 476087N - made in the USA.

Application: Range Rover Classic 1974 to 1986, Series3 6cyl suffix B onwards, Series3 109V8, Defender 4cyl petrol and V8 with external fuel pump (up to about 1984/5)

Price: 60.80 (72.96 Including VAT at 20%)



Replacement Electric Fuel Pump - PRC3901
Replacement Fuel Pump - ETC7869 Ref: ETC7869
Application: Defender 2.5 Diesel with later type pump, 2.5 Turbo Diesel and 200TDI. Discovery 200TDi. Range Rover Classic 200TDi.

Description: Replacement mechanical lift pump made in England. This is the later type for the 2.5 Diesel, if your old pump does not look the same as this you will need the conversion kit STC1190.

Price: 28.50 (34.20 Including VAT at 20%)



Replacement Fuel Pump - ETC7869
Replacement Fuel Pump Kit Ref: STC1190D
Application: 2.5 litre naturally aspirated diesel, 2.5 litre turbo diesel, 200TDI. For use where existing pump does not look like ETC7869. (The original pump being no longer available).

Description: Replacement fule pump and fitting kit to allow fitting in place of original design of pump.

Price: 27.70 (33.24 Including VAT at 20%)



Replacement Fuel Pump Kit
Replacement Electric Fuel Pump - PRC7020 Ref: PRC7020
Replacement electric petrol pump of UK manufacture.

Application: Range Rover Classic 1986-1991 with carburettor V8, Defender 110 4cyl petrol and V8 with 'in tank' pump (from approx 1984/5 onwards).
This is the low pressure pump, it is not suitable for EFi engines.

Approximate dimensions: top plate diameter 80mm, in tank length 230mm.

Price: 40.42 (48.50 Including VAT at 20%)



Replacement Electric Fuel Pump - PRC7020
Replacement 'In Tank' Pump - PRC8318 Ref: PRC8318
Replacement electric petrol pump.

Application: Range Rover Classic 1986-1991 with EFi V8.
This is the high pressure pump, it is suitable for EFi engines.

Approximate dimensions: top plate diameter 80mm, in tank length 230mm.

Price: 28.00 (33.60 Including VAT at 20%)



Replacement 'In Tank' Pump - PRC8318
Relay for Fuel Pump Ref: AGU1068L
Application: Range Rover Classic with fuel injection.

Description: This is the latest Bosch supersession of the fuel pump relay. Originally in an aluminium case. Five terminals marked - 85, 86, 87, 87, 30.

Approximate dimensions including terminals; 28mm(1.1"0 x 28mm(1.1") x 36mm(1.4").

Price: 18.00 (21.60 Including VAT at 20%)



Relay for Fuel Pump
Replacement Fuel Pump ERR5057 & kit. Ref: ERR5057=KIT
OE specification replacement diesel liftpump with fitting kit of 2x union nuts, 2x olives and 2x gaskets.

Application: Discovery 1 300TDi, Defender 300TDi and Range Rover Classic 300TDi.

Price: 30.00 (36.00 Including VAT at 20%)



Replacement Fuel Pump ERR5057 & kit.
Replacement 'In Tank' Pump & Sender Unit Ref: ESR1111=KIT
Original Equipment 'in tank' pump and fuel guage sender unit assembly.

Application: 2nd Generation Range Rover (38A) with BMW diesel engine.

Approximate dimensions: diameter of top plate 120mm x 420mm long.


Price: 128.00 (153.60 Including VAT at 20%)



Replacement 'In Tank' Pump & Sender Unit
Replacement 'In Tank' Fuel Pump Ref: ESR3926=KIT
Application: Discovery 1 V8 from KA chassis number, Discovery 1 NAS - except 'advanced evaporative loss system' vehicles, Range Rover Classic from KA chassis number.

Description: Replacement 'in tank' fuel pump and fuel level unit, seal ring, 2x olives and 2x union nuts.

Price: 145.00 (174.00 Including VAT at 20%)



Replacement 'In Tank' Fuel Pump
Page:   <<   <  1  2  3   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -