Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Rubber Peg for Wiper Blade

Rubber Peg for Wiper Blade

0.95

Application: Series 1 1948 to 1958.

Decription: Rubber peg for retaining wiper blade to wiper arm.

Approximate dimensions: overall length 20.5mm(0.8")
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Brake Master Cylinder and Conversion Kit

Brake Master Cylinder and Conversion Kit

121.20

Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Back in stock.
find out more

Clutch Plate 9.5"

Clutch Plate 9.5

45.16

Application: Series 2A (optional use) and Series 3.

Description: 9.5" diameter clutch plate (friction disc) by AP Driveline (HB8117). 10 spline centre.

Approximate dimensions: overall diameter 240mm.

find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Grommet for Steering Column

Grommet for Steering Column

13.26

Application: Sewries 1.

Description: Reproduction lLarge grommet in bulkhead for steering column.

Approximate dimensions: Overall diameter 92mm(3.6"), column hole diameter 31mm(1.2").

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Fuel System Parts for Land Rover Series 2 and 3
Page:   <<   <  1  2  3  4
Fuel Filler Cap Ref: 504655
Application: Series 2a and Series 3.

Description: Old stock Unipart 2 lug fuel filler cap. Supplied with seal,

Approximate dimensions: Overa;; diameter 96mm(3.8").

Price: 22.05 (26.46 Including VAT at 20%)



Fuel Filler Cap
Decal 'Diesel Fuel' Ref: 502951
Application: Series 2, 2A and 3.
Description: Reproduction diesel fuel decal fixed below filler cap on diesel models.
Approximate dimensions: 87mm(3.4") by 30mm(1.2")

Price: 2.15 (2.58 Including VAT at 20%)



Decal 'Diesel Fuel'
Locking Hasp for Fuel Cap Ref: 504697
Application: Series 2a and Series 3.

Description: Locking hasp for fuel cap with 'ears'. Allows use of padlock to secure fuel cap.

Approximate dimensions: Mounting screw centres 70mm(2.75")

Old part number: GLR361

Price: 3.75 (4.50 Including VAT at 20%)



Locking Hasp for Fuel Cap
Fuel Sender Unit for S2A & S3 Under-seat tank Ref: 555845D
Replacement tank unit for under-seat fuel tank.
Application: Series 2A and Series 3 with under-seat tank (not military type tanks)
Has terminal for warning lamp as well as guage.

Price: 26.46 (31.75 Including VAT at 20%)



Fuel Sender Unit for S2A & S3 Under-seat tank
New Diesel Injector CAV-Lucas type Ref: ERR1266D
New aftermarket reproduction diesel injector - sold singly.

Application: S2a 2.25diesel from suffix K, S3 2.25 diesel, Defender 2.25 diesel, Defender 2.5 diesel and Defender 2.5 diesel turbo.

Price: 26.10 (31.32 Including VAT at 20%)



New Diesel Injector CAV-Lucas type
Rebuilt Diesel Injector CAV-Lucas Ref: ERR1266E
Rebuilt CAV-Lucas diesel injector - sold singly.

Application: S2a 2.25diesel from suffix K, S3 2.25 diesel, Defender 2.25 diesel, Defender 2.5 diesel and Defender 2.5 diesel turbo.

Price: 45.00 (54.00 Including VAT at 20%)



Rebuilt Diesel Injector CAV-Lucas
Fitting kit for CAV-Lucas Injectors Ref: ERR1266FIT
Fitting kit for CAV-Lucas injectors, kit covers a set of 4 injectors.
Kit comprises; 4x copper washers, 4x steel crush washers, 8x spill rail washers, 8x imperial hold-down nuts, 8x metric hold-down nuts and 8x lock washers.

Price: 2.80 (3.36 Including VAT at 20%)



Fitting kit for CAV-Lucas Injectors
Throttle Linkage Ref: 531440
Application: Series2A and Series 3 with 4 cylinder petrol engine.

Description: Adjustable throttle linkage, clips on to ball joints both ends. Adjusting rod and nuts are threaded 2BA. Fits to balls 535168 and 1481L

Approximate dimensioons: Overall length 88mm(3.5")

Price: 8.50 (10.20 Including VAT at 20%)




People who bought this item also bought:
1. Weber Carburettor 34ICH (Ref: ZZDA2126)
2. Replacement Pump Series 2A and Series 3 (Ref: 549761D)
3. Pin for Bell Crank on Injector Pump (Ref: 277454)
Throttle Linkage
Lever Assemby for Throttle Linkage Ref: 552097
Application: Series 2A and Series 3 when Zenith carburrettor (or Weber conversion) is fitted.

Description: Lever assembly for throttle linkage, required when changing from Solex to Zenth. Supplied with bronze bush and ball.

Approximate dimensions: Overall length 132mm(5.2").

Price: 37.10 (44.52 Including VAT at 20%)



Lever Assemby for Throttle Linkage
Throttle Pedal - Series 2 and 3 Ref: 500257
Application: Series 2 and Series 3 models.

Description: Throttle pedal.

Approximate dimensions: Overall length 22.5cm(8.9"), width 32mm(1.25")

Price: 24.80 (29.76 Including VAT at 20%)



Throttle Pedal - Series 2 and 3
Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Fuel System Parts for Land Rover Series 2 and 3
Page:   <<   <  1  2  3  4

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Speedo Cable S3 4cylinder

Speedo Cable S3 4cylinder

9.60

Application: Series3 models with 4 cylinder engines. Suitable for both left hand drive and right hand drive.

Description: Reproduction speedo drive cable.

Approximate dimensions: Overall length 2.49m(98")


find out more

Parts Catalogue Range Rover 1992 to 1995

Parts Catalogue Range Rover 1992 to 1995

43.38

Application: Range Rover Classic from 1992 to 1995. Covering the following engines - 3.9V8, 4.2V8, 2.5VM, 200TDi and 300TDi.

Description: Reprint by Brookland Books with 484 pages.

Approximate dimensions: 297mm(11.7") tall, 210mm(8.3") wide and 26mm(1") thick.

find out more

Engine Stop Transfer

Engine Stop Transfer

2.34

Application: Series 3 diesel.

Description: Transfer reading 'Pull engine stop fully out before switching off'. Fixed to inside of windscreen.

find out more

Regulator for 17ACR Alternator

Regulator for 17ACR Alternator

8.40

Application: Range Rover Classic when fitted with 17ACR alternator.

Description: Lucas voltage regulator for alternator.

Alternative part numbers: UCB100, 14TR, 37581D, 607887

find out more

Vacuum Unit - 45D type

Vacuum Unit - 45D type

26.40

Application: Series3 and early Defender when fitted with Lucas 45D distributor.

Description: Lucas vacuum advance unit.

Approximate dimensions: Overall lengty 67mm(2.6"), diaphragm diameter 55mm(2.2").

find out more

Low Gear Wheel

Low Gear Wheel

31.80

Application: Series 1 and Series 2 - suffix A & B only.

Description: Low gear wheel with 39 teeth on output shaft in transfer box. Photo shows gear still coated in original wax, not all stock will come in this state.

Approximate dimensions: Thicness 33mm(1.3"), inside diameter 57mm(2.2"), outside diameter 14.5cm(5.7").


find out more

Throttle Pedal - Series 2 and 3

Throttle Pedal - Series 2 and 3

29.76

Application: Series 2 and Series 3 models.

Description: Throttle pedal.

Approximate dimensions: Overall length 22.5cm(8.9"), width 32mm(1.25")

find out more

SU Fuel Pump - Electronic Negative Earth

SU Fuel Pump - Electronic Negative Earth

122.82

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump with electronics instead points control, but otherwise to original pattern. For mounting in engine bay. For use on negative earth vehicles only. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -