Digital Dispensary

Product Sections


Best Sellers

Gasket Set for Solex 32PBI-2 Carburettor

Gasket Set for Solex 32PBI-2 Carburettor

7.66

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor.
Description: Set of 6 gaskets and 8 fibre washers for this carburettor
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Differential Pinion

Oil Seal Differential Pinion

5.21

Application: Series 1, 2 & 3 Rover type differentials.

Description: Oil seal to nose of differential. Corteco/Gaco boxed.

Approximate dimensions: outside diameter 70mm (2.76"), thickness 12.5mm (0.5").

Original part number: 217507.
find out more

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Gasket for Differential to Axle Casing

Gasket for Differential to Axle Casing

0.60

Application: Rover type differentials on Series 1, 2 & 3. Range Rover Classic, Defender and Discovery 1.
Description: replacement gasket for differential assembly to axle casing.
Approximate dimensions: overall diameter 24.4cm (9.6")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Fuel System Parts for Land Rover Series 2 and 3
Page:   <<   <  1  2  3  4   >   >>
Gauze for Sediment |Bowl Ref: 500419
Application: Series2A and Series3 4cylinder petrol models with mechanical fuel lift pump.

Description: Replacement gauze for the glass bowl sediment trap on side of lift pump.

Approximate dimensions: Outside diameter 46mm(1.8"), inside diameter 13mm(0.5").

Price: 7.96 (9.55 Including VAT at 20%)



Gauze for Sediment |Bowl
Bail Assembly Ref: 108771
Application: Series 2A and Series 3.

Description: Retainer for glass bowl on side of lift pump on 4 cylinder models.

Approximate dimensions: Overall length 92mm, width 58mm.

Price: 2.25 (2.70 Including VAT at 20%)




People who bought this item also bought:
1. Oil Filter Series 2 and Series 3 4cylinder Engines (Ref: RTC3184=)
2. Locker for Nut to Steering column S3 (Ref: NRC5385)
3. Grommet - Brake Pipe Support (Ref: 6860L)
Bail Assembly
Dual Fuel Pump Ref: AZX1501
Application: Series 2A with 2.6ltr 6cylinder petrol(gasolene) engine, also early Series 3 upto suffix B with the same engine.

Description: New SU double ended fuel pump.

PLEASE NOTE: these pumps are only made in small batches and consequently delivery time may be several weeks or even months!

Price: 195.75 (234.90 Including VAT at 20%)



Dual Fuel Pump
Overhaul Kit for DPA Injection Pump Ref: 7135-70
Application: Series 2A, Series 3 and early Defender with 2.25litre diesel engine.

Description: Replacement seal and gasket set containing approximately 70 items.

Price: 18.50 (22.20 Including VAT at 20%)




People who bought this item also bought:
1. Shut Off Bar for DPA Pump (Ref: 7123-304B)
Overhaul Kit for DPA Injection Pump
Shut Off Bar for DPA Pump Ref: 7123-304B
Application: Series 2a and Series 3 with 2.25 diesel engine.

Description: Fuel shut off bar internal to the CAV-Lucas Injection pump.

Approximate dimensions: Overall length 97mm(3.8")

Price: 10.00 (12.00 Including VAT at 20%)




People who bought this item also bought:
1. Overhaul Kit for DPA Injection Pump (Ref: 7135-70)
Shut Off Bar for DPA Pump
Under-seat Fuel Tank for Series vehicles Ref: 552174D
Replacement under-seat fuel tank, suitable for both petrol and diesel vehicles.
Application: Series 2, 2A & 3 SWB vehicles. Also LWB vehicles with under-seat tank (non Station Wagon up to about 1974).
Mounting kit and hose kit are available separately - see below.

Price: 87.86 (105.43 Including VAT at 20%)



Under-seat Fuel Tank for Series vehicles
Mounting kit for Series Under-seat Tank Ref: ZZPWBRO11AFIX
Full set of fixings to bolt tank to chassis. For use with ZZPWBRO11A.

Price: 9.50 (11.40 Including VAT at 20%)




People who bought this item also bought:
1. Hose kit for Series Under-seat Tank (Ref: ZZPWBRO11AHOSE)
Mounting kit for Series Under-seat Tank
Hose kit for Series Under-seat Tank Ref: ZZPWBRO11AHOSE
Filler hose, breather hose and 4x hose clips to suit. For use with Series under-seat tank ZZPWBRO11A.

Price: 10.61 (12.73 Including VAT at 20%)




People who bought this item also bought:
1. Mounting kit for Series Under-seat Tank (Ref: ZZPWBRO11AFIX)
Hose kit for Series Under-seat Tank
Rear Fuel Tank Series 3 LWB Ref: ZZPWBRO10B
Replacement rear fuel tank, suitable for both petrol and diesel vehicles.
Application: Series 3 LWB vehicles from suffix B (approx 1974) onwards. This is the tank with the sender unit secured by lock ring rather than screws.
Mounting kit and hose kit are available separately - see below.

Price: 134.46 (161.35 Including VAT at 20%)



Rear Fuel Tank Series 3 LWB
Fuel Sender Unit for S2A & S3 Under-seat tank Ref: 555845D
Replacement tank unit for under-seat fuel tank.
Application: Series 2A and Series 3 with under-seat tank (not military type tanks)
Has terminal for warning lamp as well as guage.

Price: 26.46 (31.75 Including VAT at 20%)



Fuel Sender Unit for S2A & S3 Under-seat tank
Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Fuel System Parts for Land Rover Series 2 and 3
Page:   <<   <  1  2  3  4   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Outer Pinion Bearing

Outer Pinion Bearing

10.72

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for outer end of differential pinion gear. Timken bearing numbers HM88046/HM88010

Approximate dimensions: Outside diameter 2.7"(68.5mm), inside diameter 1.25"(31.8mm)., height 0.93"(23.5mm).


find out more

Inner Pinion Bearing - Differential

Inner Pinion Bearing - Differential

21.70

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for inner end of differential pinion gear. Timken bearing numbers HM801346X/HM801310

Approximate dimensions: Outside diameter 3.25"(82.5mm), inside diameter 1.5"(38mm)., height 1.22"(31mm).

find out more

Seal Kir for 1 1/8" Wheel Cylinders

Seal Kir for 1 1/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for rear wheel cylinders with bore of 1 1/8"(28.5mm). Kit has sufficient seals for both front wheel cylinders.

find out more

Seal Kit for 1 3/8" Wheel Cylinders

Seal Kit for 1 3/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for front wheel cyliders with bore of 1 3/8"(35mm). Kit has sufficient seals for both front wheel cylinders.


find out more

Outlet Nozzle - SU Fuel Pump

Outlet Nozzle - SU Fuel Pump

4.44

Application: Series 1 and early Series 2 models.

Description: Nozzle for outlet of SU fuel pumps. Allows push-on fuel hose connection to pump.

Approximate dimensions: Thread diameter 22mm(0.87"), nozzle diameter 7mm(0.28").

find out more

Wiper Arm Series 3 RH

Wiper Arm Series 3 RH

24.25

Application: Series3 models.

Description: Right hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -