Digital Dispensary

Product Sections


Best Sellers

'O' Ring for Thermostat

'O' Ring for Thermostat

0.55

Application: Series 1, 2 & 3 4cylinder engines.
Description: 'O' ring for sealing thermostat to cylinder head.
Approximate dimensions: outside diameter 55mm (2.2").
Original part number 01645
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Thermostat 82 degrees

Thermostat 82 degrees

10.61

Application: Series 1 1.6ltr & 2.0ltr petrol engines, Defender 2.5 & 2.5TD diesel engines.

Description: Waxstat 82degree thermostat.

Original part number: 504560.

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Fixings Kit for Water Pump

Fixings Kit for Water Pump

19.87

Application: Series One, 1948 to 1958.

Description: Set of fixings for water pump comprising the following parts;
6x 250517 bolt 1/4"BSF x 1.5", 1x 250518 bolt 1/4"BSF x 1.75", 1x 237150 bolt 1/4"BSF x 2.25", 2x set screw 5/16"BSW x 11/16" plus 8x 1/4" lock washers and 2x 5/16" lock washers.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Fuel System Parts for Land Rover Series 2 and 3
Page:   <<   <  1  2  3  4   >   >>
Overhaul kit for Zenith 36IV Ref: 605092
Zenith boxed kit for rebuilding the 36IV carburetor as fitted to the 4cyl 2.25ltr petrol engine in late Series2A and Series3.
Kit contains: 4x gaskets, 1x O ring, 1x diaphragm and spring, throttle disc, spindle and screws, float jet, choice of slow running screws, plus numerous small fixings.

Price: 29.02 (34.82 Including VAT at 20%)




People who bought this item also bought:
1. Rotor Arm Lucas 45D (Ref: RTC3614)
2. Distributor Cap Lucas 45D (Ref: RTC3278)
Overhaul kit for Zenith 36IV
Gasket Set for Zenith 36IV Ref: 605093A
Zenith bagged gasket set for the 36IV carburetor as fitted to the 4cyl 2.25ltr petrol engine in late Series2A and Series3.
Kit contains: 4x gaskets, 1x O ring and numerous washers.

Price: 7.66 (9.19 Including VAT at 20%)



Gasket Set for Zenith 36IV
Float for Zenith 36IV Carburetor Ref: 601858
Application: Series 2A and Series 3 2.25 petrol (gasolene) engine where fitted with the Zenith 36IV carburetor.
Description: Original equipment float for the Zenith 36IV.

Price: 15.67 (18.80 Including VAT at 20%)



Float for Zenith 36IV Carburetor
Diaphragm kit for Zenith 36IV Ref: ZZB17333
Application: Series 2A and Series 3 2.25 petrol (gasolene) engine where fitted with the Zenith 36IV carburetor.
Description: Kit of diaphragm, spring ang gaskets for replacing accelerator diaphram on 36IV.

Price: 7.00 (8.40 Including VAT at 20%)



Diaphragm kit for Zenith 36IV
Weber Carburettor 34ICH Ref: ZZDA2126
Application: Series 2a and Series 3 four cylinder petrol engines.
Description: Weber 34ICH carburettor and fitting kit. Direct replacement for Zenith 36IV (ERC2886). To replace the Solex carb an additional adaptor and kit is required. Supplied with full fitting kit and instructions.

Price: 110.00 (132.00 Including VAT at 20%)




People who bought this item also bought:
1. Replacement Pump Series 2A and Series 3 (Ref: 549761D)
2. Throttle Linkage (Ref: 531440)
Weber Carburettor 34ICH
Rebuild Kit for Weber 34ICH Ref: ZZDA2206
Application: Series 2a and Series 3 four cylinder petrol engines where a Weber carburettor has been fitted.
Description: Gaskets, seals, bits and pieces to rebuild the Weber 34ICH

Price: 16.40 (19.68 Including VAT at 20%)



Rebuild Kit for Weber 34ICH
Service Kit for CD175CDSE Ref: 606098
Application: Series 2A and Series 3 with 2.6litre 6cylinder engine.

Description: Original Zenith service kit for the Stromberg CD175CDSE carburettor fitted to some of the 6 cylinder petrol engines. This kit is for the 3618 specification carburettor part number 598110

Price: 23.43 (28.12 Including VAT at 20%)



Service Kit for CD175CDSE
Throttle Linkage Ref: 531440
Application: Series2A and Series 3 with 4 cylinder petrol engine.

Description: Adjustable throttle linkage, clips on to ball joints both ends. Adjusting rod and nuts are threaded 2BA. Fits to balls 535168 and 1481L

Approximate dimensioons: Overall length 88mm(3.5")

Price: 8.50 (10.20 Including VAT at 20%)




People who bought this item also bought:
1. Steering Ball Joint, Right Hand Thread (Ref: 608464D)
2. Spring Ring, Boot to Body of Steering Ball Joint (Ref: 214685)
3. Cap for Hub Flange (Ref: 219098)
Throttle Linkage
Replacement Pump Series 2A and Series 3 Ref: 549761D
Replacement fuel lift pump.
Application: Series2A and Series3 2.25 petrol engines. Kit AEU2760D services this pump

Price: 13.57 (16.28 Including VAT at 20%)




People who bought this item also bought:
1. Weber Carburettor 34ICH (Ref: ZZDA2126)
2. Throttle Linkage (Ref: 531440)
Replacement Pump Series 2A and Series 3
Pump Repair Kit AEU2760 Ref: AEU2760D
Replacement fuel lift pump repair kit. Comprising diaphragm with 'keyed' shaft, 2x valves plus selection of seals and gaskets.
Application: Series2A & Series3 petrol and diesel lift pumps. N.B. This kit is suitable for repair of replacement pump 549761D above.

Price: 6.80 (8.16 Including VAT at 20%)



Pump Repair Kit AEU2760
Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Fuel System Parts for Land Rover Series 2 and 3
Page:   <<   <  1  2  3  4   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Locking Hasp for Fuel Cap

Locking Hasp for Fuel Cap

4.50

Application: Series 2a and Series 3.

Description: Locking hasp for fuel cap with 'ears'. Allows use of padlock to secure fuel cap.

Approximate dimensions: Mounting screw centres 70mm(2.75")

Old part number: GLR361

find out more

Bail Assembly

Bail Assembly

2.70

Application: Series 2A and Series 3.

Description: Retainer for glass bowl on side of lift pump on 4 cylinder models.

Approximate dimensions: Overall length 92mm, width 58mm.

find out more

Fuel Filler Cap

Fuel Filler Cap

26.46

Application: Series 2a and Series 3.

Description: Old stock Unipart 2 lug fuel filler cap. Supplied with seal,

Approximate dimensions: Overa;; diameter 96mm(3.8").

find out more

6 Way Lighting Switch - Military

6 Way Lighting Switch - Military

153.60

Application: Series3, Light Weight, 101 and Defender military models.

Description: Old stock Lucas 34259 six way lighting swith with facility for lock barrel (not supplied).


find out more

Bypass Hose Series 1 1948-1953

Bypass Hose Series 1 1948-1953

8.70

Application: Series 1 1948 to 1953 with 1.6 litre and early 2 litre engines.

Description: Reproduction bypass hose.

Approximate dimensions: Overall length 88mm(3.5"), outside diameter 45mm(1.8"), inside diameter 34mm(1.3")

find out more

Engine Breather-Filter

Engine Breather-Filter

22.69

Application: Defender with 2.5litre naturally aspirated diesel engine.

Description: Breather cap on top of rocker cover with single pipe outlet of 19mm diameter.

find out more

Installer Oil Seal

Installer Oil Seal

131.21

Application: Freelander2 and Evoque.

Description: Installer for oil seal. Beleived to be on front differential.

Approximate dimensions: Overall length 19.4cm(7.6"), overall diameter 90mm(3.5")

find out more

Remover Pinion Oilseal

Remover Pinion Oilseal

140.81

Application: Freelander 2 and Evoque.

Description: Remover for pinion oilseal. Use with slide hammer LRT-99-004.

Approximate dimensions: Overall length 14cm(5.5")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -