Dingocroft Engine Tools

Product Sections

Best Sellers

Spider Bypass Link Cable

£8.99

Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.
find out more

Connector Kit for Defender Switches

£8.99

Application: Defender 2001 to 2006 with the facelift dash.
Description: Connector kit for auxillary switches on centre dash. This is a direct fit to the front fog lamp switch YUG000540LNF, but will fit the other switches if the splines are removed with a small sharp blade such as a modelling scalpel.
find out more

Connector Kit for Bulb Holders

£3.49

Application: Single pole bulb holders on Defender 1995 onwards, Discovery 1, Discovery 2, Range Rover Classic late,and Range Rover 38A 1995 to 2001.
Description: Connection kit for replacing plug that connects to single pole bulb holder XPB100180.
find out more

Nut and Bolt Kit for Propshafts

£1.54

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.
Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Replacement Jate Ring and Fixings

£18.60

Replacement Jate Ring with fixing bolt, nut and spacing washer. Standard equipment on military Defenders. Fixes to chassis rail at front or rear of vehicle. Uses existing mounting holes, so no drilling required.
Application: Defender, Classic Range Rover and Discovery 1.

find out more

Socket for hub nuts

£34.20

Application: Series 1 - 3, Range Rover Classic, Discovery 1 and Defender.
Description: 52mm deep socket, 1/2" drive for hub locking nuts.

find out more

Rebuild kit for Solex 32PBI-2 Carburettor

£40.98

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.

Sorry, temporarily unavailable until a material is found for pump diaphragm that is compatable with ethanol.
find out more

Standard Set Plus for Defender, Classic Range Rover and Discovery

£162.11

Standard Set Plus of Polybush covers both ends of front radius arms, both ends of rear lower link, Panhard rod bushes, plus rear 'A' frame to chassis.
Application: Defender 1994 to 2001, Classic Range Rover 1986 to 1995, Discovery I 1989 to 1999.
Available in Classic and Comfort Formulas.
find out more

Hub Bearing Kit - Defender, Discovery and Classic Range Rover

£23.94

Application: Defender rear from approx 1985 to 1993, Discovery 1 to 'JA' chassis number (1992) front and rear, Range Rover Classic 1985 to 1995 non-ABS front and rear.
Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, Gaco inner seal, replacement outer seal, seal spacer, 2x flange gaskets and hub nut locker.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > Special Tools for Land Rover > Churchill Tools > Engine Tools - Part 1

Clutch centralising tool for Rover V8 Ref: LRT-12-001
Application: Range Rover Classic and other models fitted with Rover V8 or VM diesel engine.
Description: Clutch centralising tool for Rover V8 engine and VM diesel engine (both 2.4 and 2.5ltr)
Old part number: 18G.79
Approximate dimensions; length 178mm, spigot diameter 19mm, body diameter 23mm.
Price: £37.58 (£45.10 Including VAT at 20%)

Flywheel timing pin 2.5 diesel Ref: LRT-12-003
Application: 2.5 litre diesel and 2.5 turbo diesel (not VM or TDi)
More information .....
Price: £25.68 (£30.82 Including VAT at 20%)

Adaptor for Cylinder Head Bolts - VM Diesel Ref: LRT-12-006
Application: Range Rover Classic fitted with VM diesel engine 2.4litre or 2.5 litre.
Description: Adaptor for the tightening and removal of cylinder head bolts.
Approximate dimensions: Overall length 40mm (1.57"), width 22mm (0.87"), thickness 10mm (0.39"). Hexagonal hole 11.2mm across flats, square hole 13mm across flats.
Old part number: LST.121
Price: £43.22 (£51.86 Including VAT at 20%)

Remover/Replacer Gudgeon Pin V8 Ref: LRT-12-013
Application: Rover V8 engine.
Description: Base tool for removing and replacing gudgion pin on V8 pistons. Used in conjunction with LRT-12-014.
Old tool number: 18G1150
Price: £193.71 (£232.45 Including VAT at 20%)

Related products:

1. Adaptor fgor Gudgion Pin Removal (Ref: LRT-12-014)

Adaptor fgor Gudgion Pin Removal Ref: LRT-12-014
Application: Rover V8 engine.
Description: Use with base tool LRT-12-013 for removal of gudgion pin from V8 pistons.
Old tool number: 18G1150B
Price: £79.72 (£95.66 Including VAT at 20%)

Related products:

1. Remover/Replacer Gudgeon Pin V8 (Ref: LRT-12-013)

Oil Seal Protection Sleeve Ref: LRT-12-015
Application: 5 main bearing S3 engines, Defender 2.5P, 2.5D, 2.5 diesel turbo and 200TDi.
Description: Sleeve to guide rear main oil into position without damage.
Approximate dimensions: overall diameter 102mm (4.0"), height 30mm (1.18").
Old tool number: 18G1344
Price: £50.15 (£60.18 Including VAT at 20%)

Timing Guage VM Diesel Ref: LRT-12-019
Application: Range Rover Classic fitted with VM diesel engine 2.4litre or 2.5 litre.
Description: Timing guage marked 0, 2, 4, 6, 8, 10 & 25 degrees.
Old part number: 18G.1369A
Price: £51.81 (£62.17 Including VAT at 20%)

Replacer Crankshaft Oil Seal Ref: LRT-12-028
Application: 2.5 litre diesel, 2.5 litre diesel turbo and 200TDi engines.
Description: Crankshaft oilseal installer. Allows seals to be fitted square and to the correct depth.
Approximate dimensions: length 140mm (5.5"), diameter of body 50mm (1.97"), diameter of collar 67mm (2.64")
Old part number: 18G1456A
Price: £67.05 (£80.46 Including VAT at 20%)

Remover / Replacer Fuel Injector Pump Drive Gear 2.5 diesel Ref: LRT-12-029
Application: 2.5 litre diesel and 2.5 turbo diesel (not VM or TDi)
Original tool number 18G.1457
More information
Price: £109.18 (£131.02 Including VAT at 20%)

Timing tool - DPS inj. pump Ref: LRT-12-030
Application: 2.5 litre diesel and 2.5 turbo diesel (not VM or TDi)
More information
Price: £72.17 (£86.60 Including VAT at 20%)

Crank and Cam Gear Remover Ref: LRT-12-031
Application: 12J and 19J diesel engines in Defender. Also maintool in conjunction with LRT-12-048 is used for 200TDi engine and in conjunction withZLRT-12-078 on the 300TDi engine.
Description: Puller for the removal of the crankshaft and camshaft timing gears.
Price: £125.81 (£150.97 Including VAT at 20%)

Guides for Rear Main Bearing Oil Seals Ref: LRT-12-035
Application: 2.25 petrol and diesel, 2.5 petrol and diesel, 200TDi, 300TDi.
Description: Pair of guides to facilitate the fitting of the 'T' seals on the rear main bearing cap. Not essential but do save a lot of time and foul language.
Old part number: RO.270304A
Price: £47.51 (£57.01 Including VAT at 20%)

Drift Inlet Valve Guide Ref: LRT-12-036
Aplication: Series 3 petrol and diesel 4 cylinder, 200TDi and 300TDi. NB also suitable for exhaust valve guides on 300TDi.
Description: Drift for fitting and removing valve guides.
Approximate dimensions: overall length 126mm (5"), stub diameter 7.8mm (0.3"), body diameter 12.5mm (0.5").
Old tool number: RO274400

Price: £20.88 (£25.06 Including VAT at 20%)

Valve Guide Drift Ref: LRT-12-037
Application: Series 2 & 3 4 cylider petrol and diesel, Defender 2.5 litre petrol exhaust valve guide removal. Rover V8 exhaust and inlet valve guide removal.
Description: Drift for removing valve guides. Can be used with hammer or press.
Approximate dimensions: overall length 12.6cm (5"), body diameter 11.9mm (0.47")
Price: £35.73 (£42.88 Including VAT at 20%)

Clutch centraliser 4 cylinder Ref: LRT-12-040A
Clutch alignment tool.
Application: All 4 cylinder engines except VM, MPi and Freelander
Price: £79.01 (£94.81 Including VAT at 20%)

DPA pump timing tool Ref: LRT-12-042
Description: DPA diesel injection pump timing tool.
Old part number: RO.605863

Price: £132.11 (£158.53 Including VAT at 20%)

Crankshaft pulley holding tool 2.5 diesel & Tdi Ref: LRT-12-043
Application: 2.5 diesel, 2.5 turbo diesel and 200TDi .
Description: Holding Tool, Crankshaft Pulley. Provides leverage to undo crank nose bolt.
Old part number: LST.127

Price: £105.46 (£126.55 Including VAT at 20%)

Flywheel timing pin 200TDi & 300TDi Ref: LRT-12-044
Application: 200TDi and 300TDi except models with ETC (Electronic Throttle Control)
Description: Flywheel timing pin.
Old part number: LST.128

Price: £29.71 (£35.65 Including VAT at 20%)

Remover/retainer injector pump Tdi Ref: LRT-12-045
Application: 200TDi and 300TDi.
Description: Remover and retainer for Injection Pump Drive Gear
Old part number: LST.129

Price: £86.21 (£103.45 Including VAT at 20%)

Drift Valve Stem Guide Ref: LRT-12-046
Application: Series 3 4 cylinder petrol and diesel, 200TDi and 300TDi. In fact any guides with internal diameter of 8mm (5/16").
Description: Drift for replacing valve guides, use with LRT-12-515 height guage.
Approximate dimensions: Overall length 124mm ( 4.9"), stub diamater 7.8mm (0.3"), body diameter 20mm (0.8").
Old tool number: LST130

Price: £20.14 (£24.17 Including VAT at 20%)

Related products:

1. Distance Piece for Valve Guides (Ref: LRT-12-515)

Remover Crank Damper Ref: LRT-12-049
Application: 200TDi & 300TDi diesel engines. Used in Discovery 1, Defender and Range Rover Classic.
Description: Tool for removing crankshaft damper from front of engine to allow timing belt renewal and other jobs.
Price: £60.99 (£73.19 Including VAT at 20%)

Injection Pump Tool 2.4VM Ref: LRT-12-050
Application: 2.4litre VM diesel as fitted to Range Rover Classic
Description: Tool to remove and retain drive gear on injection pump.
Old part number: LST139
Price: £137.07 (£164.48 Including VAT at 20%)

Camshaft Locking Pins for TD5 Engine Ref: LRT-12-058
Application: TD5 Engine in Defender and Discovery 2.
Description: Pair of pins for locking the camshafts in position when working on valve train.
Each pins is approximately 6.5cm long and 6.6mm in diameter.
Price: £38.31 (£45.97 Including VAT at 20%)

Remover Valve Stem Seal Ref: LRT-12-071
Application: Freelander 1.8 litre petrol & Freelander 2.0 litre L type diesel engines.
Description: Remover tool for oil seals on valve stems
Old part number: 18G1577
Price: £72.49 (£86.99 Including VAT at 20%)

Replace Timing Cover Oil Seal Ref: LRT-12-077
Application: 300TDI engine.
Description: Tool for setting timing cover oil seal squarely and to the correct depth.
New tool number: 303-890.
Approximate dimensions: overall length 80mm (3.15"), body diameter 65mm (2.6")
Price: £54.19 (£65.03 Including VAT at 20%)

Remover Crank Timing Gear Ref: LRT-12-078
Application: 300TDi diesel engine, used in conjunction with ZZLRT-12-031.
Description: Adaptor for the removal of the crankshaft gear.
Price: £50.97 (£61.16 Including VAT at 20%)

Replacer Crank Front Oil Seal Ref: LRT-12-079
Application: 300TDi engine.
Description: Tool for setting front crank oil seal squarely and to correct depth.
New tool number: 303-892
Approximate dimensions: overall length 10.5cm (4.1"), body diameter 60mm (2.4")
Price: £65.46 (£78.55 Including VAT at 20%)

Crank Holding Tool for 300TDi Engine Ref: LRT-12-080
Description: This tool bolts to the crank shaft damper by means of 4 bolts M8 x 70mm (not supplied with tool, but are available separately if required). The long arm then provides the necessary resistance to allow the removal of the crank nose bolt.
Application: 300TDi engine in all applications.
Price: £128.95 (£154.74 Including VAT at 20%)

Replacer Camshaft Oil Seal Ref: LRT-12-082
Application: 300TDi engine.
Description: Tool for setting camshaft oil seal squarely and to the correct depth.
New tool number: 303-894.
Approximate dimensions: overall length 80mm (3.15"), body diameter 60mm (2.4").
Price: £47.75 (£57.30 Including VAT at 20%)

Remover, Camshaft Oil Seal 300TDi Ref: LRT-12-083
Description: Tool to remove the engine camshaft oil seal.
Application: 300TDi engine.
Price: £53.01 (£63.61 Including VAT at 20%)

Flywheel timing pin 300TDi Ref: LRT-12-085
Application: 300TDi with ETC (Electronic Throttle Control)
Description: Flywheel timing pin
Price: £25.36 (£30.43 Including VAT at 20%)

Replacer Front Cover Oil Seal Ref: LRT-12-089
Application: Rover V8 engine from 1995 onwards as fitted to Discovery 1, Discovery 2 and Range Rover 38A.
Description: Tool to fit front cover oilseal squarely and to correct depth.
New tool number: 303-900.
Approximate dimensions: overall length 11cm (4.3"), overall diameter 75mm (3")
Price: £58.94 (£70.73 Including VAT at 20%)

Retainer Oil Pump Gears V8 95> Ref: LRT-12-090
Application: Rover V8 engine from 1995 onwards as fitted to Discovery 1, Discovery 2 and Range Rover 38A.
Description: Tol to hold the oil pump gears in position when working on front cover of this engine.
New tool part number: 303-901
Price: £230.64 (£276.77 Including VAT at 20%)

Replacer Rear Crank Oil Seal V8 95> Ref: LRT-12-091
Application: Rover V8 engine from 1995 onwards as fitted to Discovery 1, Discovery 2 and Range Rover 38A.
Description: Tool to replace rear crankshaft oil seal squarely and to correct depth.
New tool number: 303-902.
Approximate dimensions: overall length 58mm (2.3"), overall diameter 105mm (4.1")
Price: £62.93 (£75.52 Including VAT at 20%)

Related products:

1. Rear Main Oil Seal Protective Sleeve (Ref: LRT-12-095)

Remover Oilseal Ref: LRT-12-092
Application: Although listed as an engine tool, this remover is almost universal.
Description: Hooked end of one half can be applied to oilseals in many situations. The other half is then applied to one of the series of holes in first half and then acts as fulcrum and lever to remove seal.
New tool number: 303-903
Price: £78.62 (£94.34 Including VAT at 20%)

Water pump holding tool Ref: LRT-12-093
Application: 300TDi, TD5, Rover V8 1995-2003, BMW diesel Range Rover 1995-2001
Description: Tool for holding water pump to allow easy removal of viscous coupling. Use in conjunction with LRT-12-094
Price: £96.56 (£115.87 Including VAT at 20%)

Related products:

1. Spanner for Viscous Coupling (Ref: LRT-12-094)

Spanner for Viscous Coupling Ref: LRT-12-094
Application: 300TDi, TD5, Rover V8 1995-2003, BMW diesel Range Rover 1995-2001, TD6 Range Rover 3
Description: Large wrench for nut on viscous couplings. Use in conjunction with LRT-12-093.
Double ended with 32mm and 36mm A/F openings. Overall length approx 420mm.
Price: £45.94 (£55.13 Including VAT at 20%)

Related products:

1. Water pump holding tool (Ref: LRT-12-093)

Rear Main Oil Seal Protective Sleeve Ref: LRT-12-095
Application: Rover V8 engine from 1995 onwards as fitted to Discovery 1, Discovery 2 and Range Rover 38A.
Description: Guide and protector for fitting rear main oil seal, used in conjunction with LRT-12-091
New tool number: 303-906.
Approximate dimensions: overall length 38mm (1.5"), overall diameter 85mm (3.3")
Price: £42.32 (£50.78 Including VAT at 20%)

Related products:

1. Replacer Rear Crank Oil Seal V8 95> (Ref: LRT-12-091)

Digital Dispensary > Special Tools for Land Rover > Churchill Tools > Engine Tools - Part 1

Haven't found what you want? Then try our quotation service.

Main Pages

New Products

Overhaul Kit for DPA Injection Pump

£22.20

Application: Series 2A, Series 3 and early Defender with 2.25litre diesel engine.
Description: Replacement seal and gasket set containing approximately 70 items.
find out more

Diaphragm for DPS Injection Pump

£17.40

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Replacement diaphragm by 'SPACO'.
Approximate dimensions: Overall diameter 43.5mm(1.7"), internal diameter 7.5mm(0.3")
find out more

Overhaul Kit DPS Injection Pump

£54.00

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Kit by 'SPACO' containing gaskets, seals, rotor blades, washers, lockers etc
find out more

Return Spring DPS Injection Pump

£4.20

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Return spring for DPS injection pump.
Approximate dimensions: Coil diameter 24.6mm(1"), wire diameter 1.6mm(0.06")
find out more

Thermostat Housing

£28.50

Application: Freelander One 1.8 K16 Petrol, Discovery Two with TD5 and V8.
Description: Genuine thermostat housing with 3 outlets.
Approximate dimensions: Outlet diameters 35mm(1.4"), 35mm(1.4") and 34mm(1.3").
find out more

Radiator Top Hose TD4

£38.53

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine radiator top hose.
Approximate dimensions: Inside diameter one end 46mm(1.8") and 32mm(1.3") other end, length 40cm(15.7")
find out more

Heater Hose TD4

£26.64

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine three way hose connecting engine to heater.
Approximate dimensions: Inside diameters of hoses 25mm(1"), 21mm(0.8") and 19mm(0.75")
find out more

Genuine Pollen Filter

£32.44

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Genuine pollen filter for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Pollen Filter by Mahle

£13.92

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Pollen filter by Mahle for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England) email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -

SearchQuest: Internet Marketing, SEO