Digital Dispensary

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Seal Kit for Brake Master Cylinder

Seal Kit for Brake Master Cylinder

19.80

Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524
find out more

Anchor Plate for 10inch brake shoes

Anchor Plate for 10inch brake shoes

8.44

Anchor plate for use with 10inch brakes - see kit above. One anchor plate is used with each pair of shoes. These do not need replacing with every change of brake shoes, but they do become worn over several years use. Sold singly.
Approximate dimensions: 78mm x 45mm x 5mm.

Application: see STC2796DKIT above.
find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Inner Wheel Hub Seal

Inner Wheel Hub Seal

4.28

Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Split Pin - Shocker Retention

Split Pin - Shocker Retention

0.25

Application: Series 1, Series 2 and Series 3.

Description: Replacement split pin for retaining shock absorber to bottom plate of spring.

Approximate dimensions: Overall length 55.5mm(2.2"), diameter 6mm(0.24")

find out more

Dust Cap for Bleed Screw

Dust Cap for Bleed Screw

0.30

Application: Suitable for all bleed screws.
Description: Soft plastic dust cap for bleed screws.
Approximate dimensions: length 15mm(0.6"), diameter 8mm (0.3")
Original part number 234957
find out more

Screw for retaining Brake Drums

Screw for retaining Brake Drums

0.25

Application: Series 1, 2 & 3.
Description: Countersunk head screw 3/8"BSW by 5/8" long.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > REGULAR Service and Repair Parts > Braking Systems > Drums and shoes. Discs and pads.
Page:   <<   <  1  2  3  4   >   >>
Axle Set of Brake Shoes - 11" Front wide type Ref: STC3945DKIT
Replacement axle set of 4 11inch by 3inch wide brake shoes plus 4x pull-off springs and 6x brake drum screws.
Application: Front axle on the following models, Series 2A LWB 6cyl, Ser 3 LWB 6cyl and V8 and 101 Forward Control.

Price: 14.50 (17.40 Including VAT at 20%)



Axle Set of Brake Shoes - 11
Pair of Hand Brake Shoes Ref: STC3821
Application: Series 2A and Series 3 1960 to 1984.

Description: Pair of hand brake shoes by Mintex or Denso (depending on availability). For 9"(22.96cm) diameter drum. Shoes are 1.75"(45mm) wide.

Previous part numbers: RTC3404, GBS552 & 516031

Price: 12.75 (15.30 Including VAT at 20%)




People who bought this item also bought:
1. Adjuster Unit for Handbrake (Ref: 37H6134L)
2. Brake Pipe Set 2A SWB (Ref: ZZGB5601)
3. Grommet - Brake Pipe Support (Ref: 6860L)


Related products:
1. Adjuster Unit for Handbrake (Ref: 37H6134L)
2. Expander Unit for Hand Brake (Ref: 515366D)
Pair of Hand Brake Shoes
Return Spring for Hand Brake Shoes Ref: FRC8549D
Application: Series 2A and Series 3 1960 to 1984.

Description: Replacement pull off spring for hand brake shoes.

Approximate dimensions: overall length 125mm(4.9"), coil diameter 15mm(0.6"), wire diameter 2.4mm(0.1")

Old part numbers: FRC3234 and 515465.

Price: 0.85 (1.02 Including VAT at 20%)



Return Spring for Hand Brake Shoes
Snail Cam Replacement Kit Ref: RTC3176D
Kit of parts to replace snail cam brake adjusters on drum brake systems. One kit will replace a full set of snail cams on one axle for 11" brakes, or two axles for 10" brakes.
Please note that this kit is not genuine Land Rover and comes without instructions. So you need to pay great attention to how original snails are set up and how many spacers to use before removal.

Price: 9.95 (11.94 Including VAT at 20%)




People who bought this item also bought:
1. Rear Brake Pad Set for Defender (Ref: ZZDA4185)
2. Front Brake Pad Set for Defender (Ref: ZZDA4159)
3. Brake Pad Fitting Kit (Ref: STC8574)
Snail Cam Replacement Kit
Pair of 10" Brake Drums - non genuine Ref: 591039DKIT
Pair of 10" brake drums equivalent to 591039. These are drilled to accept the larger (16mm) diameter wheel studs. Though non-genuine, these are good quality drums and do run 'true'. Supplied with both metric and imperial retaining screws.
Application: Ser2A SWB from approx 1968, Ser3 SWB and Defender 90 to 1994.

Price: 42.50 (51.00 Including VAT at 20%)



Pair of 10
Pair of 11inch Brake Drums - non-genuine. Ref: 576973DKIT
Pair of 11" brake drums equivalent to 576973. These are drilled to accept the larger (16mm) diameter wheel studs. Though non-genuine, these are good quality drums and do run 'true'. Supplied with both metric and imperial retaining screws.
Application: Ser"A LWB from approx 1969, Ser3 LWB, Ser3 SWB front from 1980, Defender 110 rear to 1994.

Price: 42.50 (51.00 Including VAT at 20%)




People who bought this item also bought:
1. Axle Set of Brake Shoes - 11" Front (Ref: STC3944DKIT)
2. Replacement Brake Master Cylinder S2A & S3 (Ref: 90577520D)
3. Dust Cap for Bleed Screw (Ref: 594091)
Pair of 11inch Brake Drums - non-genuine.
Screw for retaining Brake Drums Ref: 1510
Application: Series 1, 2 & 3.
Description: Countersunk head screw 3/8"BSW by 5/8" long.

Price: 0.21 (0.25 Including VAT at 20%)




People who bought this item also bought:
1. Felt Seal for Series 1 Pedals (Ref: 70621)
2. Grommet Series 1 Pedals (Ref: 70620)
3. Return Spring - Leading Shoe 10" (Ref: 503981)
Screw for retaining Brake Drums
Pair of Front Brake Discs by Lockheed Ref: FRC7329DPAIR
Pair of Lockheed - Delphi boxed solid brake discs.
Application: Defender front 1983 to 2000, Range Rover Classic 1986 to 1989, Discovery 1 1989 to 1999.
Approximate dimensions: overall diameter 30cm, inside diameter 10cm, overall width 7.9cm, thickness of disc 14mm

Price: 39.50 (47.40 Including VAT at 20%)



Pair of Front Brake Discs by Lockheed
Fitting Kit for a pair of Discs Ref: BRAKEDISCFITKIT01
Fitting kit containing 10x screws and lock washers to fix disc to hub, 2 each of early and late type hub seals, 2x hub nut lockers and 2x flange gaskets. Oil seals are original equipment by Gaco/Angus.
Application: Range Rover Classic 1972 to June 1985, either front or rear pair.

Price: 12.50 (15.00 Including VAT at 20%)



Fitting Kit for a pair of Discs
Fitting Kit for a pair of Discs Ref: BRAKEDISCFITKIT02
Fitting kit containing 10x screws and lock washers to fix disc to hub, 2 each of inner and outer hub seals, 2x hub nut lockers and 2x flange gaskets. Inner oil seals are original equipment by Gaco/Angus, outer are replacement.
Application: Range Rover Classic 1985 to 1989 and non-ABS to JA624516. Discovery up to chassis # JA032850. Either front or rear pair.

Price: 12.50 (15.00 Including VAT at 20%)



Fitting Kit for a pair of Discs
Digital Dispensary > REGULAR Service and Repair Parts > Braking Systems > Drums and shoes. Discs and pads.
Page:   <<   <  1  2  3  4   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -