Dingocroft Driveline Freelander

Product Sections

Best Sellers

Spider Bypass Link Cable

£8.99

Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.
find out more

Connector Kit for Defender Switches

£8.99

Application: Defender 2001 to 2006 with the facelift dash.
Description: Connector kit for auxillary switches on centre dash. This is a direct fit to the front fog lamp switch YUG000540LNF, but will fit the other switches if the splines are removed with a small sharp blade such as a modelling scalpel.
find out more

Connector Kit for Bulb Holders

£3.49

Application: Single pole bulb holders on Defender 1995 onwards, Discovery 1, Discovery 2, Range Rover Classic late,and Range Rover 38A 1995 to 2001.
Description: Connection kit for replacing plug that connects to single pole bulb holder XPB100180.
find out more

Nut and Bolt Kit for Propshafts

£1.54

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.
Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Replacement Jate Ring and Fixings

£18.60

Replacement Jate Ring with fixing bolt, nut and spacing washer. Standard equipment on military Defenders. Fixes to chassis rail at front or rear of vehicle. Uses existing mounting holes, so no drilling required.
Application: Defender, Classic Range Rover and Discovery 1.

find out more

Socket for hub nuts

£34.20

Application: Series 1 - 3, Range Rover Classic, Discovery 1 and Defender.
Description: 52mm deep socket, 1/2" drive for hub locking nuts.

find out more

Rebuild kit for Solex 32PBI-2 Carburettor

£40.98

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.

Sorry, temporarily unavailable until a material is found for pump diaphragm that is compatable with ethanol.
find out more

Standard Set Plus for Defender, Classic Range Rover and Discovery

£162.11

Standard Set Plus of Polybush covers both ends of front radius arms, both ends of rear lower link, Panhard rod bushes, plus rear 'A' frame to chassis.
Application: Defender 1994 to 2001, Classic Range Rover 1986 to 1995, Discovery I 1989 to 1999.
Available in Classic and Comfort Formulas.
find out more

Hub Bearing Kit - Defender, Discovery and Classic Range Rover

£23.94

Application: Defender rear from approx 1985 to 1993, Discovery 1 to 'JA' chassis number (1992) front and rear, Range Rover Classic 1985 to 1995 non-ABS front and rear.
Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, Gaco inner seal, replacement outer seal, seal spacer, 2x flange gaskets and hub nut locker.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > Freelander 1 Parts > Driveline Freelander

GKN Bearing for Propellor Shaft Support Ref: TOQ000040
Application: Freelander One, 1996 to 2006. Models with 4 cylinder engines.
Description: GKN original equipment sealed bearing rubber mounted in bracket. Supports the viscous unit at mid point of propellor shaft.
Price: £46.10 (£55.32 Including VAT at 20%)

Replacement Bearing for Propellor Shaft Support Ref: TOQ000040D
Application: Freelander One, 1996 to 2006. Models with 4 cylinder engines.
Description: Sealed bearing rubber mounted in bracket.

Price: £14.20 (£17.04 Including VAT at 20%)

Universal Joint for Propellor Shaft Ref: TVF100000=
Application: Freelander One 1996 to 2006.
Description: GKN universal joint for propellor shaft. Suits rear of front shaft and both ends of rear shaft.
Approximate dimensions: across opposite faces 61.5mm(2.4"), cup diameter 24mm(0.95")
Price: £19.07 (£22.88 Including VAT at 20%)

Viscous Coupling for Propellor Shaft Ref: TOR000010
Application: Freelander One 1996 to 2006.
Description: Original Equipment viscour coupling from GKN. This is the unit half way between transfer box and rear differential. It allows limited slip between front and rear wheels.
Approximate dimensions: overall length 38cm(15"), overall diameter 14.5cm(5.7").
Price: £355.00 (£426.00 Including VAT at 20%)

Damper for Viscous Unit Ref: ZZDA2352
Application: Freelander One, 1996 to 2006.
Description: Replacement damper for propellor shaft viscous unit.
Price: £72.92 (£87.50 Including VAT at 20%)

Genuine Mount for Rear Differential Ref: KHC500070
Application: All Freelander One models 1996 to 2006.
Description: Mount for front of rear differential.
Price: £16.67 (£20.00 Including VAT at 20%)

Replacement Mount for Rear Differential Ref: KHC500070D
Application: All Freelander One models 1996 to 2006.
Description: Mount for front of rear differential.
Price: £9.41 (£11.29 Including VAT at 20%)

RH Repacement Mount for Rear Differential Ref: KHC500080D
Application: All Freelander One models 1996 to 2006.
Description: Mount for right hsnd side of rear differential.
Price: £15.50 (£18.60 Including VAT at 20%)

LH Replacement Mount for Rear Differential Ref: KHC500090D
Application: All Freelander One models 1996 to 2006.
Description: Mount for left hand of rear differential.
Price: £15.50 (£18.60 Including VAT at 20%)

Hub Bearing Kit Ref: ANR5861
Application: Freelander One 1996 to 2001 (to chassis number 1A999999).
Description: Kit from SNR comprising hub bearing, circlip and stake nut.
Approximate dimensions: overall diameter 82.5mm(3.25"), internal diameter 44mm(1.73"), thickness 37mm(1.46")
Price: £29.06 (£34.87 Including VAT at 20%)

Hub Bearing Ref: RFC000010=
Application: Freelander One to 2006 from chassis number 2A000001 onwards. Freelander Two.
Description: Hub bearing form NSK. includes magnetic wheel speed transmitter.
Approximate dimensions: overall diameter 82.5mm(3.25"), internal diameter 44mm(1.73"), thickness 37mm(1.46")
Price: £17.43 (£20.92 Including VAT at 20%)

Stake Nut for Drive Shaft Ref: CDU1534L
Application: Freelander One 1996 to 2006, Discovery Two 1998 to 2006, Range Rover 38A 1995 to 2001.
Description: Stake nut for drive shaft. Holds outer end of drive shaft to hub.
Apprximate dimensions: thread diameter 24mm, spanner size 32mm height 23.5mm.
Price: £1.50 (£1.80 Including VAT at 20%)

Digital Dispensary > Freelander 1 Parts > Driveline Freelander

Haven't found what you want? Then try our quotation service.

Main Pages

New Products

Overhaul Kit for DPA Injection Pump

£22.20

Application: Series 2A, Series 3 and early Defender with 2.25litre diesel engine.
Description: Replacement seal and gasket set containing approximately 70 items.
find out more

Diaphragm for DPS Injection Pump

£17.40

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Replacement diaphragm by 'SPACO'.
Approximate dimensions: Overall diameter 43.5mm(1.7"), internal diameter 7.5mm(0.3")
find out more

Overhaul Kit DPS Injection Pump

£54.00

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Kit by 'SPACO' containing gaskets, seals, rotor blades, washers, lockers etc
find out more

Return Spring DPS Injection Pump

£4.20

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Return spring for DPS injection pump.
Approximate dimensions: Coil diameter 24.6mm(1"), wire diameter 1.6mm(0.06")
find out more

Thermostat Housing

£28.50

Application: Freelander One 1.8 K16 Petrol, Discovery Two with TD5 and V8.
Description: Genuine thermostat housing with 3 outlets.
Approximate dimensions: Outlet diameters 35mm(1.4"), 35mm(1.4") and 34mm(1.3").
find out more

Radiator Top Hose TD4

£38.53

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine radiator top hose.
Approximate dimensions: Inside diameter one end 46mm(1.8") and 32mm(1.3") other end, length 40cm(15.7")
find out more

Heater Hose TD4

£26.64

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine three way hose connecting engine to heater.
Approximate dimensions: Inside diameters of hoses 25mm(1"), 21mm(0.8") and 19mm(0.75")
find out more

Genuine Pollen Filter

£32.44

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Genuine pollen filter for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Pollen Filter by Mahle

£13.92

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Pollen filter by Mahle for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England) email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -

SearchQuest: Internet Marketing, SEO