Digital Dispensary

Product Sections


Best Sellers

Gasket Set for Solex 32PBI-2 Carburettor

Gasket Set for Solex 32PBI-2 Carburettor

7.66

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor.
Description: Set of 6 gaskets and 8 fibre washers for this carburettor
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Differential Pinion

Oil Seal Differential Pinion

5.21

Application: Series 1, 2 & 3 Rover type differentials.

Description: Oil seal to nose of differential. Corteco/Gaco boxed.

Approximate dimensions: outside diameter 70mm (2.76"), thickness 12.5mm (0.5").

Original part number: 217507.
find out more

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Gasket for Differential to Axle Casing

Gasket for Differential to Axle Casing

0.60

Application: Rover type differentials on Series 1, 2 & 3. Range Rover Classic, Defender and Discovery 1.
Description: replacement gasket for differential assembly to axle casing.
Approximate dimensions: overall diameter 24.4cm (9.6")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:   <<   <  1  2  3  4  5
Replacement Condensor for Lucas 25D Ref: RTC3472
Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines.Also used on late Series 1 engines.

Description: No longer Lucas boxed condensor as the Lucas ones have a different connector on lead now that makes fixing ackward. So now sourcing from good after market source to original style of Lucas unit!

Approximate dimensions: overall diameter 17mm (0.67 inches), lead 57mm (2.24 inches).

Original part numbers 269988, 245007. DCB101, GSC101

Price: 2.23 (2.68 Including VAT at 20%)




People who bought this item also bought:
1. Gasket, Cylinder Head 2.0 litre Petrol (Ref: 231046)
2. Gasket By-pass Hose Ends (Ref: 210419)
3. Brush Set for Dynamo (Ref: 261483)
Replacement Condensor for Lucas 25D
Condensor Lucas 45D Ref: RTC6621
Application: Lucas 45D 4cylinder distributor as fitted to Series 3 petrol engines.
Description: Condensor with two leads.
Approximate dimensions: overall diameter 17mm (0.67 inches), orange lead 55mm (2.17 inches), black lead 430mm (16.9 inches).

Price: 2.22 (2.66 Including VAT at 20%)



Condensor Lucas 45D
Condensor for Military Screened Distributors Ref: 600730D
Application: Series 2, 2A & Series 3 military vehicles with screened distributors.
Description: Reproduction condensor for use in screened 4 cylinder distributors as fitted to 24volt fitted for radio military Land Rovers.
Approximate dimensions: overall length 44mm(1.7"), overall diameter 17mm(0.67")

Price: 12.25 (14.70 Including VAT at 20%)



Condensor for Military Screened Distributors
Condensor Ducellier Ref: RTC6620
Application: Ducellier 4cylinder distributor as fitted to Series 3 petrol engines.
Description: Replacement condensor supplied with mounting clamp.
Approximate dimensions: overall diameter 17mm (0.67 inches), length of condensor 39mm (1.54 inches), lead 150mm (5.91 inches).

Price: 0.99 (1.19 Including VAT at 20%)




People who bought this item also bought:
1. Spark Plug Champion N12YC (Ref: RTC3570)
2. Contact Breakers Lucas 25D (Ref: RTC3270)
3. Ignition Coil for Series 2A and Series 3 (Ref: PRC9858)
Condensor Ducellier
Low Tension Lead 25D Ref: 600329
Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines, also used on late Series 1 engines.

Description: Reproduction low tension lead and insulator for 25D distributor.

Price: 7.75 (9.30 Including VAT at 20%)




People who bought this item also bought:
1. Condensor Ducellier (Ref: RTC6620)
2. Spark Plug Champion N12YC (Ref: RTC3570)
3. Contact Breakers Lucas 25D (Ref: RTC3270)
Low Tension Lead 25D
Vacuum Unit - DM2 type Ref: 269989
Application: Series 1 1954 to 1958 with Lucas DM2 distributor.

Description: Precisely made reproduction of the original Lucas vacuum advance unit for the DM2 (40504A) distributor.

Approximate dimensions: Overall length 135mm(5.3"), outside diameter of diaphrapm 65mm(2.6")

Lucas part numbers: 421943 and 54411727



Price: 58.00 (69.60 Including VAT at 20%)



Vacuum Unit - DM2 type
Vacuum Unit - 25D type Ref: 502286
Application: Series 2A 1958 to 19566with Lucas 25D distributor.

Description: Precisely made reproduction of the original Lucas vacuum advance unit for the 25D distributor. This is the early type with threaded connection for the vacuum pipe.

Approximate dimensions: Overall length 135mm(5.3"), outside diameter of diaphrapm 65mm(2.6")

Lucas part number: 54411598

Price: 58.00 (69.60 Including VAT at 20%)



Vacuum Unit - 25D type
Vacuum Unit - 45D type Ref: AEU1034
Application: Series3 and early Defender when fitted with Lucas 45D distributor.

Description: Lucas vacuum advance unit.

Approximate dimensions: Overall lengty 67mm(2.6"), diaphragm diameter 55mm(2.2").

Price: 22.00 (26.40 Including VAT at 20%)



Vacuum Unit - 45D type
Vacuum Pipe Elbow Ref: ZZ030.016
Application: Series 2 and 3 petrol engined models.

Description: Rubber elbow connector for vacuum pipe to distributor and/or to inlet manifold.

Approximate dimensions: Outside diameter 11mm(7/16"), internaldiameter 3mm(0.12") one end and 4mm(0.16") the other end. length 28mm(1.1") x 23mm(0.91").

Price: 1.95 (2.34 Including VAT at 20%)




People who bought this item also bought:
1. Genuine Lucas 45D4 Distributor (Ref: ETC5835)
2. Vacuum Pipe Straight Connector (Ref: 574878)
Vacuum Pipe Elbow
Vacuum Pipe Straight Connector Ref: 574878
Application: Series 2 and 3 models with petrol engines.

Description: Straight connector for vacuum pipe to disributor and/or inlet manifold.

Approximate dimensions: Outside diameter 11mm(7/16"), inside diameter 3mm(0.12") one end and 4mm(0.16") other end, length 27.5mm(1.08").

Price: 0.45 (0.54 Including VAT at 20%)




People who bought this item also bought:
1. Vacuum Pipe Elbow (Ref: ZZ030.016)
2. Genuine Lucas 45D4 Distributor (Ref: ETC5835)
Vacuum Pipe Straight Connector
Page:   <<   <  1  2  3  4  5

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Outer Pinion Bearing

Outer Pinion Bearing

10.72

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for outer end of differential pinion gear. Timken bearing numbers HM88046/HM88010

Approximate dimensions: Outside diameter 2.7"(68.5mm), inside diameter 1.25"(31.8mm)., height 0.93"(23.5mm).


find out more

Inner Pinion Bearing - Differential

Inner Pinion Bearing - Differential

21.70

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for inner end of differential pinion gear. Timken bearing numbers HM801346X/HM801310

Approximate dimensions: Outside diameter 3.25"(82.5mm), inside diameter 1.5"(38mm)., height 1.22"(31mm).

find out more

Seal Kir for 1 1/8" Wheel Cylinders

Seal Kir for 1 1/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for rear wheel cylinders with bore of 1 1/8"(28.5mm). Kit has sufficient seals for both front wheel cylinders.

find out more

Seal Kit for 1 3/8" Wheel Cylinders

Seal Kit for 1 3/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for front wheel cyliders with bore of 1 3/8"(35mm). Kit has sufficient seals for both front wheel cylinders.


find out more

Outlet Nozzle - SU Fuel Pump

Outlet Nozzle - SU Fuel Pump

4.44

Application: Series 1 and early Series 2 models.

Description: Nozzle for outlet of SU fuel pumps. Allows push-on fuel hose connection to pump.

Approximate dimensions: Thread diameter 22mm(0.87"), nozzle diameter 7mm(0.28").

find out more

Wiper Arm Series 3 RH

Wiper Arm Series 3 RH

24.25

Application: Series3 models.

Description: Right hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -