Digital Dispensary

Product Sections


Best Sellers

'O' Ring for Thermostat

'O' Ring for Thermostat

0.55

Application: Series 1, 2 & 3 4cylinder engines.
Description: 'O' ring for sealing thermostat to cylinder head.
Approximate dimensions: outside diameter 55mm (2.2").
Original part number 01645
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Thermostat 82 degrees

Thermostat 82 degrees

10.61

Application: Series 1 1.6ltr & 2.0ltr petrol engines, Defender 2.5 & 2.5TD diesel engines.

Description: Waxstat 82degree thermostat.

Original part number: 504560.

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Fixings Kit for Water Pump

Fixings Kit for Water Pump

19.87

Application: Series One, 1948 to 1958.

Description: Set of fixings for water pump comprising the following parts;
6x 250517 bolt 1/4"BSF x 1.5", 1x 250518 bolt 1/4"BSF x 1.75", 1x 237150 bolt 1/4"BSF x 2.25", 2x set screw 5/16"BSW x 11/16" plus 8x 1/4" lock washers and 2x 5/16" lock washers.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:   <<   <  1  2  3  4  5   >   >>
Contact Breaker Points Set 1.6 Ref: 260073
Application: Series 1 with 1.6 litre petrol engine 1948 to 1953.
Description: Reproduction of Lucas points 407050

Price: 14.15 (16.98 Including VAT at 20%)




People who bought this item also bought:
1. Condenser S1 1.6 litre (Ref: 260070)
Contact Breaker Points Set 1.6
Contact Breaker Points Set Ref: 245006
Application: Lucas 420196 distributor fitted to 2.0ltr engine 1954-1955.

Description: Contact breaker points set for distributor.

Temporarily out of stock - see below.

Price: 6.77 (8.12 Including VAT at 20%)


Contact Breaker Points Set
Contact Breaker Points Set Ref: DSB116C
Description: Alternative to 245006 which is currently unavailable. This set is very similar and can be made to fit with minor adaption. Better something than nothing! Lucas boxed.

Price: 9.32 (11.18 Including VAT at 20%)




People who bought this item also bought:
1. Replacement Condensor for Lucas 25D (Ref: RTC3472)
2. Black High Tension Lead, Copper Cored (Ref: 80603)
3. Ignition Coil (Ref: 263732D)
Contact Breaker Points Set
Contact Breakers Lucas 25D Ref: RTC3270
Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines, also used on late Series 1 engines with the DM2 distributor.

Description: Lucas boxed contact breaker set also known as 'points'.

Original part number 269987.

Price: 2.50 (3.00 Including VAT at 20%)





Related products:
1. Low Tension Lead 25D (Ref: 600329)
Contact Breakers Lucas 25D
Contact Breakers Lucas 45D Ref: RTC364
Application: Lucas 45D 4cylinder distributor as fitted to Series 3 petrol engines.
Description: Contact breaker set (or points) with fixed contacts and red insulator. Supplied with wiper felt.

Price: 2.20 (2.64 Including VAT at 20%)



Contact Breakers Lucas 45D
Contact Breakers Lucas 45D Ref: RTC6627
Application: Lucas 45D 4cylinder distributor as fitted to Series 3 petrol engines.
Description: Lucas boxed contact breaker set (or points) with sliding contacts and blue insulator. Supplied with wiper felt.

Price: 3.20 (3.84 Including VAT at 20%)



Contact Breakers Lucas 45D
Contact Breakers Ducellier Ref: RTC6625
Application: Ducellier 4cylinder distributor as fitted to Series 3 petrol engines.
Description: Genuine contact breaker set (or points).

Price: 1.44 (1.73 Including VAT at 20%)



Contact Breakers Ducellier
Condenser S1 1.6 litre Ref: 260070
Application: Series 1 1600cc engine 1948 to 1953.
Description: Condenser for distributor, equivalent to Lucas 407044
Approximate dimensions: ovelall length 44mm(1.7"), overall diameter 17mm(0.7")

Price: 12.75 (15.30 Including VAT at 20%)




People who bought this item also bought:
1. Contact Breaker Points Set 1.6 (Ref: 260073)
Condenser S1 1.6 litre
Replacement Condensor for Lucas 25D Ref: RTC3472
Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines.Also used on late Series 1 engines.

Description: No longer Lucas boxed condensor as the Lucas ones have a different connector on lead now that makes fixing ackward. So now sourcing from good after market source to original style of Lucas unit!

Approximate dimensions: overall diameter 17mm (0.67 inches), lead 57mm (2.24 inches).

Original part numbers 269988, 245007. DCB101, GSC101

Price: 2.23 (2.68 Including VAT at 20%)




People who bought this item also bought:
1. Spark Plug Cover (Ref: ZZSB05F)
2. Contact Breaker Points Set (Ref: DSB116C)
3. Tube Clutch Link (Ref: 561661)
Replacement Condensor for Lucas 25D
Condensor Lucas 45D Ref: RTC6621
Application: Lucas 45D 4cylinder distributor as fitted to Series 3 petrol engines.
Description: Condensor with two leads.
Approximate dimensions: overall diameter 17mm (0.67 inches), orange lead 55mm (2.17 inches), black lead 430mm (16.9 inches).

Price: 2.22 (2.66 Including VAT at 20%)



Condensor Lucas 45D
Page:   <<   <  1  2  3  4  5   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Locking Hasp for Fuel Cap

Locking Hasp for Fuel Cap

4.50

Application: Series 2a and Series 3.

Description: Locking hasp for fuel cap with 'ears'. Allows use of padlock to secure fuel cap.

Approximate dimensions: Mounting screw centres 70mm(2.75")

Old part number: GLR361

find out more

Bail Assembly

Bail Assembly

2.70

Application: Series 2A and Series 3.

Description: Retainer for glass bowl on side of lift pump on 4 cylinder models.

Approximate dimensions: Overall length 92mm, width 58mm.

find out more

Fuel Filler Cap

Fuel Filler Cap

26.46

Application: Series 2a and Series 3.

Description: Old stock Unipart 2 lug fuel filler cap. Supplied with seal,

Approximate dimensions: Overa;; diameter 96mm(3.8").

find out more

6 Way Lighting Switch - Military

6 Way Lighting Switch - Military

153.60

Application: Series3, Light Weight, 101 and Defender military models.

Description: Old stock Lucas 34259 six way lighting swith with facility for lock barrel (not supplied).


find out more

Bypass Hose Series 1 1948-1953

Bypass Hose Series 1 1948-1953

8.70

Application: Series 1 1948 to 1953 with 1.6 litre and early 2 litre engines.

Description: Reproduction bypass hose.

Approximate dimensions: Overall length 88mm(3.5"), outside diameter 45mm(1.8"), inside diameter 34mm(1.3")

find out more

Engine Breather-Filter

Engine Breather-Filter

22.69

Application: Defender with 2.5litre naturally aspirated diesel engine.

Description: Breather cap on top of rocker cover with single pipe outlet of 19mm diameter.

find out more

Installer Oil Seal

Installer Oil Seal

131.21

Application: Freelander2 and Evoque.

Description: Installer for oil seal. Beleived to be on front differential.

Approximate dimensions: Overall length 19.4cm(7.6"), overall diameter 90mm(3.5")

find out more

Remover Pinion Oilseal

Remover Pinion Oilseal

140.81

Application: Freelander 2 and Evoque.

Description: Remover for pinion oilseal. Use with slide hammer LRT-99-004.

Approximate dimensions: Overall length 14cm(5.5")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -