Digital Dispensary

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Seal Kit for Brake Master Cylinder

Seal Kit for Brake Master Cylinder

19.80

Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524
find out more

Anchor Plate for 10inch brake shoes

Anchor Plate for 10inch brake shoes

8.44

Anchor plate for use with 10inch brakes - see kit above. One anchor plate is used with each pair of shoes. These do not need replacing with every change of brake shoes, but they do become worn over several years use. Sold singly.
Approximate dimensions: 78mm x 45mm x 5mm.

Application: see STC2796DKIT above.
find out more

Locking Tool - Fuel Injection Pump Sprocket

Locking Tool - Fuel Injection Pump Sprocket

9.90

Application: Defender 2007 to 2016 with Puma TDCi engine.

Description: Tool to lock sprocket of injection pump in position.

Approximate dimensions: Overall diameter 115mm(4.5"), inside diameter 69mm(2.7"), height 22mm(0.9").

find out more

Sundry Sale £00.01

0.01


find out more

Washer - Shock Absorber Fixing

Washer - Shock Absorber Fixing

0.56

Application: Series 2A and Series 3.

Description: Washer for retaining top of shock absorbers. Used with NRC7064 and 253826.

Approximate dimensions: Outside diameter 41mm(1.6"), inside diameter 12mm(0.47"), thickness 2.8mm(0.11").

find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Washer Shock Absorber Bush

Washer Shock Absorber Bush

0.30

Application: Series 1, Series 2 and Series 3 shock absorbers. Defender, Discovery 1 and Range Rover Classic anti-roll bar links.

Description: Replacement washer for retaining shock absorber to spring bottom plate.

Approximate dimensions: overall diameter 41mm(1 5/8"), inside diameter 21.5mm(0.85"), thickness 3.2mm(1/8").

Old part number: 264024

find out more

Split Pin - Shocker Retention

Split Pin - Shocker Retention

0.25

Application: Series 1, Series 2 and Series 3.

Description: Replacement split pin for retaining shock absorber to bottom plate of spring.

Approximate dimensions: Overall length 55.5mm(2.2"), diameter 6mm(0.24")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:   <<   <  1  2  3  4  5   >   >>
Distributor Cap for Lucas 25D Ref: 600328
Application: Early Series2 and Series2A with Lucas 25D distributor.

Description: Reproduction distributor cap with 'acorn' nut type retainers for HT leads. Supplied with 5 acorn nuts.

Approximate dimensions: Overall diameter 77mm(3"), height 74mm(2.9").

Price: 9.74 (11.69 Including VAT at 20%)





Related products:
1. Split Brass Washer (Ref: 214279)
Distributor Cap for Lucas 25D
Distributor Cap for Lucas 25D Ref: 566859=
Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines.
Description: Intermotor boxed distributor cap with 'push in' HT leads.
Approximate dimensions: overall diameter 77mm (3.03 inches), height 74mm (2.91 inches)

Price: 3.68 (4.42 Including VAT at 20%)



Distributor Cap for Lucas 25D
Distributor Cap Lucas 45D Ref: RTC3278
Application: Lucas 45D 4cylinder distributor as fitted to Series 3 petrol engines.
Description: Genuine boxed distributor cap with 'push in' HT leads.
Approximate dimensions: overall diameter 73.5mm (2.9 inches), height 72mm (2.83 inches)

Price: 16.09 (19.31 Including VAT at 20%)




People who bought this item also bought:
1. Rotor Arm Lucas 45D (Ref: RTC3614)
2. Overhaul kit for Zenith 36IV (Ref: 605092)
Distributor Cap Lucas 45D
Distributor Cap for Lucas 6cylinder Ref: 605544
Application: Lucas 25D/6cylinder distributor as fitted to late Series2A and Series 3 petrol engines.

Description: Replacement distributor cap with 'push in' HT leads.

Approximate dimensions: overall diameter 78mm (3.1 inches), height 79mm (3.11 inches)

Price: 8.50 (10.20 Including VAT at 20%)



Distributor Cap for Lucas 6cylinder
Distirbutor Cap 6cyl 45D Ref: RTC3813
Application: Series 3 6 cylinder with Lucas 45D distributor.

Description:Replacement distributor Cap.

Approximate dimensions: overall diameter 72.5mm(2.9"), height 72mm(2.8")

Price: 10.57 (12.68 Including VAT at 20%)



Distirbutor Cap 6cyl 45D
Distributor Cap Ducellier 4 Cylinder Ref: RTC4932D
Application: Ducellier 4cylinder distributor as fitted to Series 3 petrol engines.

Description: Commercial Ignition boxed distributor cap with 'push in' HT leads.

Approximate dimensions: overall diameter 69.5mm (2.74 inches), height 63.5mm (2.5 inches)

Price: 4.20 (5.04 Including VAT at 20%)



Distributor Cap Ducellier 4 Cylinder
Distributor Cap Lucas V8 Ref: STC8368
Application: All Rover V8 engines when fitted with Lucas distributor.
Description: Lucas DDB107 distributor cap.
Approximate dimensions: Overall diameter 105mm, height 75mm.

Price: 10.95 (13.14 Including VAT at 20%)



Distributor Cap Lucas V8
Distributor Cap 1.8 Freelander Ref: NJD10010
Application: Freelander 1 with 1.8 litre K series petrol engine to chassis number 'YA' (approx 2000).
Description: Genuine distributor cap.
Approximate dimensions: Cap diameter 85mm(3.35")

Price: 15.91 (19.09 Including VAT at 20%)



Distributor Cap 1.8 Freelander
Pair of Clips for Distributor Cap Ref: 502287
Application: Lucas 25D 4 cylinder ditributor as used on Series 2, Series 2A and Series 3.

Description: Nicely made reproduction clips for distributor cap. Sold as a pair.

Approximate dimensions: Overall length 77mm(3"), width 9mm(0.35")

Lucas part number: 421824

Price: 10.00 (12.00 Including VAT at 20%)



Pair of Clips for Distributor Cap
Rotor Arm Ref: 261242
Application: Series 1 1600petrol with Lucas D3A4 or DVX4A distributor.

Description: Reproduction rotor arm.

Approximate dimensions: Overal length 43.5mm(1.8"), height 17mm(0.66")

Lucas part number: 408355

Price: 11.58 (13.90 Including VAT at 20%)




People who bought this item also bought:
1. Spark Plug Cover (Ref: ZZSB05F)
2. Head Gasket Set 1600cc (Ref: ZZCB310)
3. Pair of Gearbox Mounts for Series 1 (Ref: S1GBOXMNTS)
Rotor Arm
Page:   <<   <  1  2  3  4  5   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -