Digital Dispensary

Product Sections


Best Sellers

Gasket Set for Solex 32PBI-2 Carburettor

Gasket Set for Solex 32PBI-2 Carburettor

7.66

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor.
Description: Set of 6 gaskets and 8 fibre washers for this carburettor
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Differential Pinion

Oil Seal Differential Pinion

5.21

Application: Series 1, 2 & 3 Rover type differentials.

Description: Oil seal to nose of differential. Corteco/Gaco boxed.

Approximate dimensions: outside diameter 70mm (2.76"), thickness 12.5mm (0.5").

Original part number: 217507.
find out more

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Gasket for Differential to Axle Casing

Gasket for Differential to Axle Casing

0.60

Application: Rover type differentials on Series 1, 2 & 3. Range Rover Classic, Defender and Discovery 1.
Description: replacement gasket for differential assembly to axle casing.
Approximate dimensions: overall diameter 24.4cm (9.6")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:  1  2   >   >>
Clutch Plate 9" Ref: 591704
Application: Series 1, Series 2 and 2A. Where 9" clutch is used.

Description: Nine inch diameter clutch plate by 'Automotive Products' (HB8748). This has a ten spline centre.

Approximate dimensions: overall diameter 230mm.

Previous part number: GCP109

Price: 36.20 (43.44 Including VAT at 20%)



Clutch Plate 9
Clutch Cover 9" Ref: 591705
Application: Series 1, Series 2 and 2A. Where 9" clutch is used.
Description: Clutch cover plate (pressure plate) for nine inch diameter friction disc. By 'Automotive Productsi' (HA2520).

Currently unavailable - 'tooling broken'

Price: 67.88 (81.46 Including VAT at 20%)


Clutch Cover 9
Clutch Plate 9.5" Ref: 8510290
Application: Series 2A (optional use) and Series 3.

Description: 9.5" diameter clutch plate (friction disc) by AP Driveline (HB8117). 10 spline centre.

Approximate dimensions: overall diameter 240mm.

Price: 37.63 (45.16 Including VAT at 20%)



Clutch Plate 9.5
Series 2A Optional 9.5" Clutch Cover Ref: 571228
Application: Series 2A with optional 9.5" clutch. This option was quite common on North American market Series 2A, but fairly rare in other markets.
Description: Clutch cover (pressure plate) for use with 9.5" diameter clutch plate on Series 2A vehicles with the part syncomesh gearbox. NOT for use in Series 3 or Series 2A where full syncromesh gearbox used.

Temporarily out of stock, due date October 2017.

Price: 57.50 (69.00 Including VAT at 20%)


Series 2A Optional 9.5
Clutch Cover 9.5" Ref: 576557
Application: Series 3 4cylinder and 6 cylinder engines.
Description: Clutch cover (pressure plate) for use with 9.5" clutch plates. 'Borg & Beck Delphi' type HE5584.

Price: 45.00 (54.00 Including VAT at 20%)



Clutch Cover 9.5
Clutch Release Bearing Series1 & 2A Ref: STC1130D
Application: Series1, Series2 and 2A part syncromesh gearbox with the unsealed clutch release mechanism. This is the usual setup on the Series 2 and 2A. This bearing is also used in various gearboxes and transfer boxes.

Description: Single row ball bearing by FAG, type 6207.C3.

Approximate dimensions: overall diameter 72mm (2.83"), inside diameter 35mm (1.38"), thickness 17mm (0.67").

Price: 8.50 (10.20 Including VAT at 20%)



Clutch Release Bearing Series1 & 2A
Bearing Clutch Release Series 2A Ref: 268053d
Application: Series 2A with sealed clutch release mechanism.

Description: Replacement narrow single row ball bearing assembly for clutch release mechanism. This sealed arrangement was optional for most markets and consequently is not common. Bearing number is 98207.

Approximate dimensions: Outside diameter 70mm(2.76"), inside diameter 35mm(1.38"), thichness 10mm(0.4").

Price: 18.85 (22.62 Including VAT at 20%)



Bearing Clutch Release Series 2A
Clutch Release Bearing - S3 type Ref: FRC9568D
Application: Series 3 four and six cylinder engines. Range Rover Classic.

Description: Original design but non genuine release bearing from Bearmach. This design works better with Series 3 clutch covers than the later type bearing (FTC5200).

Approximate dimensions: Outside diameter 76.5mm(3"), length 51mm(2"), inside diameter 39.5mm(1.6").

Previous part numbers: GRB236, GRB235, FRC4679

Price: 9.55 (11.46 Including VAT at 20%)



Clutch Release Bearing - S3 type
Clutch Release Bearing Ref: FTC5200=
Application: Series 3, Defender, Discovery 1 and Range Rover Classic.
Description: Latest design self centering release bearing by NSK. Standard equipment on Defender and Discovery 1, can be used on Series 3 and Range Rover Classic.

Price: 15.00 (18.00 Including VAT at 20%)




People who bought this item also bought:
1. Brass 'T' Piece for 3/16" Pipes (Ref: ZZHU30)
2. Brass Female Connector (Ref: ZZHU20)
3. Pack of 10 Male Unions for 3/16" Pipe (Ref: ZZHU0110)
Clutch Release Bearing
Clutch Release Arm Ref: 576137
Application: Series 3, Defender V8 and TD5, Range Rover Classic V8, Discovery 1 V8 and Discovery 2 TD5.

Description: Cast steel clutch release arm.

Approximate dimensions: Overall length 21.2cm(8.3").

Price: 28.68 (34.42 Including VAT at 20%)



Clutch Release Arm
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Outer Pinion Bearing

Outer Pinion Bearing

10.72

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for outer end of differential pinion gear. Timken bearing numbers HM88046/HM88010

Approximate dimensions: Outside diameter 2.7"(68.5mm), inside diameter 1.25"(31.8mm)., height 0.93"(23.5mm).


find out more

Inner Pinion Bearing - Differential

Inner Pinion Bearing - Differential

21.70

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for inner end of differential pinion gear. Timken bearing numbers HM801346X/HM801310

Approximate dimensions: Outside diameter 3.25"(82.5mm), inside diameter 1.5"(38mm)., height 1.22"(31mm).

find out more

Seal Kir for 1 1/8" Wheel Cylinders

Seal Kir for 1 1/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for rear wheel cylinders with bore of 1 1/8"(28.5mm). Kit has sufficient seals for both front wheel cylinders.

find out more

Seal Kit for 1 3/8" Wheel Cylinders

Seal Kit for 1 3/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for front wheel cyliders with bore of 1 3/8"(35mm). Kit has sufficient seals for both front wheel cylinders.


find out more

Outlet Nozzle - SU Fuel Pump

Outlet Nozzle - SU Fuel Pump

4.44

Application: Series 1 and early Series 2 models.

Description: Nozzle for outlet of SU fuel pumps. Allows push-on fuel hose connection to pump.

Approximate dimensions: Thread diameter 22mm(0.87"), nozzle diameter 7mm(0.28").

find out more

Wiper Arm Series 3 RH

Wiper Arm Series 3 RH

24.25

Application: Series3 models.

Description: Right hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -