Digital Dispensary

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Seal Kit for Brake Master Cylinder

Seal Kit for Brake Master Cylinder

19.80

Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524
find out more

Anchor Plate for 10inch brake shoes

Anchor Plate for 10inch brake shoes

8.44

Anchor plate for use with 10inch brakes - see kit above. One anchor plate is used with each pair of shoes. These do not need replacing with every change of brake shoes, but they do become worn over several years use. Sold singly.
Approximate dimensions: 78mm x 45mm x 5mm.

Application: see STC2796DKIT above.
find out more

Locking Tool - Fuel Injection Pump Sprocket

Locking Tool - Fuel Injection Pump Sprocket

9.90

Application: Defender 2007 to 2016 with Puma TDCi engine.

Description: Tool to lock sprocket of injection pump in position.

Approximate dimensions: Overall diameter 115mm(4.5"), inside diameter 69mm(2.7"), height 22mm(0.9").

find out more

Sundry Sale £00.01

0.01


find out more

Washer - Shock Absorber Fixing

Washer - Shock Absorber Fixing

0.56

Application: Series 2A and Series 3.

Description: Washer for retaining top of shock absorbers. Used with NRC7064 and 253826.

Approximate dimensions: Outside diameter 41mm(1.6"), inside diameter 12mm(0.47"), thickness 2.8mm(0.11").

find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Washer Shock Absorber Bush

Washer Shock Absorber Bush

0.30

Application: Series 1, Series 2 and Series 3 shock absorbers. Defender, Discovery 1 and Range Rover Classic anti-roll bar links.

Description: Replacement washer for retaining shock absorber to spring bottom plate.

Approximate dimensions: overall diameter 41mm(1 5/8"), inside diameter 21.5mm(0.85"), thickness 3.2mm(1/8").

Old part number: 264024

find out more

Split Pin - Shocker Retention

Split Pin - Shocker Retention

0.25

Application: Series 1, Series 2 and Series 3.

Description: Replacement split pin for retaining shock absorber to bottom plate of spring.

Approximate dimensions: Overall length 55.5mm(2.2"), diameter 6mm(0.24")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > DISCOVERY 1 parts > Discovery 1 Fuel System
Overhaul kit for Pair of HIF44 SU Carburetors Ref: ZZCRK268
Application: Rover V8 engine where fitted with twin HIF44 SU carburetors.
Description: Genuine SU boxed overhaul kit.

Price: 72.00 (86.40 Including VAT at 20%)



Overhaul kit for Pair of HIF44 SU Carburetors
Gasket Pack for SU HIF44 Carburetter Ref: WZX1505
Application: Rover V8 with SU HIF44 carbs.

Description: Original Equipment gasket pack to service one carburettor.

Price: 8.25 (9.90 Including VAT at 20%)



Gasket Pack for SU HIF44 Carburetter
Replacement Fuel Pump - ETC7869 Ref: ETC7869
Application: Defender 2.5 Diesel with later type pump, 2.5 Turbo Diesel and 200TDI. Discovery 200TDi. Range Rover Classic 200TDi.

Description: Replacement mechanical lift pump made in England. This is the later type for the 2.5 Diesel, if your old pump does not look the same as this you will need the conversion kit STC1190.

Price: 28.50 (34.20 Including VAT at 20%)



Replacement Fuel Pump - ETC7869
Replacement Fuel Pump Kit Ref: STC1190D
Application: 2.5 litre naturally aspirated diesel, 2.5 litre turbo diesel, 200TDI. For use where existing pump does not look like ETC7869. (The original pump being no longer available).

Description: Replacement fule pump and fitting kit to allow fitting in place of original design of pump.

Price: 27.70 (33.24 Including VAT at 20%)



Replacement Fuel Pump Kit
Replacement Fuel Pump ERR5057 & kit. Ref: ERR5057=KIT
OE specification replacement diesel liftpump with fitting kit of 2x union nuts, 2x olives and 2x gaskets.

Application: Discovery 1 300TDi, Defender 300TDi and Range Rover Classic 300TDi.

Price: 30.00 (36.00 Including VAT at 20%)



Replacement Fuel Pump ERR5057 & kit.
Replacement 'In Tank' Fuel Pump Ref: ESR3926=KIT
Application: Discovery 1 V8 from KA chassis number, Discovery 1 NAS - except 'advanced evaporative loss system' vehicles, Range Rover Classic from KA chassis number.

Description: Replacement 'in tank' fuel pump and fuel level unit, seal ring, 2x olives and 2x union nuts.

Price: 145.00 (174.00 Including VAT at 20%)



Replacement 'In Tank' Fuel Pump
Seal Kit for Bosch Injection Pump Ref: ZZRGK223/1
Application: Defender 1990 to 1999, Discovery 1 and Range Rover Classic 1990 to 1995 when fitted with either 200TDi or 300TDi engine.

Description: Replacement seal kit for Bosch EP/VE 4 & 6 cylinder injection pumps.

Price: 24.65 (29.58 Including VAT at 20%)



Seal Kit for Bosch Injection Pump
Diaphragm for Bosch Injection Pump Ref: 1460503304
Application: Defender, Discovery 1 and Range Rover Classic when fitted with either 200TDi or 300TDi engine.

Description: Bosch diaphragm for Bosch EP/VE injection pump.

Approximate dimensions: Overall diameter 69mm(2.7"), height 10mm(0.4"), central hole diameter 6mm(0.24")

Price: 13.84 (16.61 Including VAT at 20%)



Diaphragm for Bosch Injection Pump
Injector for 200TDi Ref: ETC8412=
Diesel Injector for 200TDi engines - rebuilt by Bosch with new nozzle. Sold singly.

Application: Defender 200TDi, Discovery 200TDI and Range Rover Classic 200TDi.

Price: 198.00 (237.60 Including VAT at 20%)



Injector for 200TDi
Fitting Kit for 200TDi Injectors Ref: ETC8412FIT
Fitting kit for 200TDi injectors, kit covers a set of 4 injectors.
Kit comprises; 4x copper sealing washers, 8x spill rail washers and 4x hold-down nuts.

Price: 2.00 (2.40 Including VAT at 20%)



Fitting Kit for 200TDi Injectors
Digital Dispensary > DISCOVERY 1 parts > Discovery 1 Fuel System

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -