Digital Dispensary

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Seal Kit for Brake Master Cylinder

Seal Kit for Brake Master Cylinder

19.80

Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524
find out more

Anchor Plate for 10inch brake shoes

Anchor Plate for 10inch brake shoes

8.44

Anchor plate for use with 10inch brakes - see kit above. One anchor plate is used with each pair of shoes. These do not need replacing with every change of brake shoes, but they do become worn over several years use. Sold singly.
Approximate dimensions: 78mm x 45mm x 5mm.

Application: see STC2796DKIT above.
find out more

Locking Tool - Fuel Injection Pump Sprocket

Locking Tool - Fuel Injection Pump Sprocket

9.90

Application: Defender 2007 to 2016 with Puma TDCi engine.

Description: Tool to lock sprocket of injection pump in position.

Approximate dimensions: Overall diameter 115mm(4.5"), inside diameter 69mm(2.7"), height 22mm(0.9").

find out more

Sundry Sale £00.01

0.01


find out more

Washer - Shock Absorber Fixing

Washer - Shock Absorber Fixing

0.56

Application: Series 2A and Series 3.

Description: Washer for retaining top of shock absorbers. Used with NRC7064 and 253826.

Approximate dimensions: Outside diameter 41mm(1.6"), inside diameter 12mm(0.47"), thickness 2.8mm(0.11").

find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Washer Shock Absorber Bush

Washer Shock Absorber Bush

0.30

Application: Series 1, Series 2 and Series 3 shock absorbers. Defender, Discovery 1 and Range Rover Classic anti-roll bar links.

Description: Replacement washer for retaining shock absorber to spring bottom plate.

Approximate dimensions: overall diameter 41mm(1 5/8"), inside diameter 21.5mm(0.85"), thickness 3.2mm(1/8").

Old part number: 264024

find out more

Split Pin - Shocker Retention

Split Pin - Shocker Retention

0.25

Application: Series 1, Series 2 and Series 3.

Description: Replacement split pin for retaining shock absorber to bottom plate of spring.

Approximate dimensions: Overall length 55.5mm(2.2"), diameter 6mm(0.24")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > DISCOVERY 1 parts > Discovery 1 Books and Publications
Discovery 1 1989 to 1999 Technical Publications Ref: ZZLTP3004
Comprehensive contents covering parts books, owners manuals and workshop manuals for Discovery 1 from 1989 to 1999.

Product Features
> Printable - print only the pages you need. (Windows only)
> Searchable - search the entire section in seconds.
> Zoom - zoom in to see the exact details.
> Bookmarked - manuals are bookmarked to quickly locate sections.

System Requirements
PC Windows 2000 or later; DVD Reader, PDC viewer; must have administration rights to allow installation.
Mac OS X Mac OS X 10.4 or above. For OS X 10.6 (Snow Leopard) DVD Reader, PDC viewer
Important - Documents are viewable but not printable through Mac OSX. To print using a Mac you must be running a Windows installation e.g. using PC emulation software

Price: 51.66 (61.99 Including VAT at 20%)



Discovery 1 1989 to 1999 Technical Publications
Workshop manual 1989 to 1994 Ref: STC410
Land Rover Discovery Workshop Manual covering all models from 1989 to 1994 by the Technical Communication Department of Land Rover. Reprinted by Brookland Books.
A massive tome covering all aspects. There is a large data section at the front. Being aimed at the professional some minor steps in procedures are not fully explained.
If you are going to get serious with your Discovery you need this book.
Covers V8 (3.5 & 3.9), Mpi and 200Tdi engined examples.
Soft back 8.3" x 11.5", 940 pages approx.

Price: 44.95



Workshop manual 1989 to 1994
Workshop manual 1995 to 1998 Ref: LRL0079ENG
DISCOVERY 95/98 MY Workshop Manual by Land Rover. Reprinted by Brooklands Books.
The official workshop manual covering 2.0 Mpi, 3.9V8i, 4.0 V8 Petrol Engines & 300 Tdi Diesel Engines as well as the rest of the vehicle . This is a massive tome 2" thick and split into 41 sections. A 'must' for the serious DIYer or professional mechanic.
Soft back 11.5" x 8.2", approx 1100 pages.
Models covered Discovery 1995 to 1998

Price: 61.20



Workshop manual 1995 to 1998
Haynes manual for Discovery 1989 to 1998 Ref: ZZHAYNES3016
HAYNES Discovery 1989 to 1998 Service and Repair MANUAL by Steve Rendle, Mark Coombs and R M Jex
Covers models with 200Tdi and 300Tdi diesel engines and 3.5 & 3.9 V8 petrol engines. A good basic manual including sections on roadside repairs and MOT test checks.
Hard back 10.9" x 8.4", approx. 550 pages with 100's b&w photos and diagrams
Models covered: Discovery 1989 to 1998 not Mpi

Price: 17.80



Haynes manual for Discovery 1989 to 1998
Electrical Troubleshooting Manual - Discovery 1996 Ref: LRL0028ENG
Electrical Troubleshooting Manual - Discovery 1996 Model
by Land Rover
A manual in 47 sections plus introduction and index. Covers all things electrical from fuel injection through instruments, lamps, central locking, power seats etc. etc. Also very useful sections on component location and harness routing. A real "must" for those serious at getting to grips with the electrics.
This is the English version, but it is available in other languages.
Loose leaf 11.6" x 8.2", approx 430 pages + a further 200 of admendments


Price: 50.81



Electrical Troubleshooting Manual - Discovery 1996
Parts Book Discovery 1 Ref: RTC9947CF
Covers all models form 1989 to 1998 - 200TDI, 300TDI, 2.0MPI, 3.5 V8 carbs, 3.5 V* EFi and 3.9 V8 EFi.

This is a reprint of the official Land Rover parts book by Brookland Books. Over 300 pages broken down by section. Index at end in alpha numeric order.

Approximate dimensions: 292mm(11.5") high x 210mm(8.3") wide x 34mm(1.3")

Price: 45.20 (54.24 Including VAT at 20%)



Parts Book Discovery 1
Digital Dispensary > DISCOVERY 1 parts > Discovery 1 Books and Publications

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -