Dingocroft Defender and Series vehicles

Product Sections

Best Sellers

Spider Bypass Link Cable

£8.99

Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.
find out more

Connector Kit for Defender Switches

£8.99

Application: Defender 2001 to 2006 with the facelift dash.
Description: Connector kit for auxillary switches on centre dash. This is a direct fit to the front fog lamp switch YUG000540LNF, but will fit the other switches if the splines are removed with a small sharp blade such as a modelling scalpel.
find out more

Connector Kit for Bulb Holders

£3.49

Application: Single pole bulb holders on Defender 1995 onwards, Discovery 1, Discovery 2, Range Rover Classic late,and Range Rover 38A 1995 to 2001.
Description: Connection kit for replacing plug that connects to single pole bulb holder XPB100180.
find out more

Nut and Bolt Kit for Propshafts

£1.54

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.
Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Replacement Jate Ring and Fixings

£18.60

Replacement Jate Ring with fixing bolt, nut and spacing washer. Standard equipment on military Defenders. Fixes to chassis rail at front or rear of vehicle. Uses existing mounting holes, so no drilling required.
Application: Defender, Classic Range Rover and Discovery 1.

find out more

Socket for hub nuts

£34.20

Application: Series 1 - 3, Range Rover Classic, Discovery 1 and Defender.
Description: 52mm deep socket, 1/2" drive for hub locking nuts.

find out more

Rebuild kit for Solex 32PBI-2 Carburettor

£40.98

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.

Sorry, temporarily unavailable until a material is found for pump diaphragm that is compatable with ethanol.
find out more

Standard Set Plus for Defender, Classic Range Rover and Discovery

£162.11

Standard Set Plus of Polybush covers both ends of front radius arms, both ends of rear lower link, Panhard rod bushes, plus rear 'A' frame to chassis.
Application: Defender 1994 to 2001, Classic Range Rover 1986 to 1995, Discovery I 1989 to 1999.
Available in Classic and Comfort Formulas.
find out more

Hub Bearing Kit - Defender, Discovery and Classic Range Rover

£23.94

Application: Defender rear from approx 1985 to 1993, Discovery 1 to 'JA' chassis number (1992) front and rear, Range Rover Classic 1985 to 1995 non-ABS front and rear.
Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, Gaco inner seal, replacement outer seal, seal spacer, 2x flange gaskets and hub nut locker.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > Body and Chassis Parts > Body and Chassis Repair parts > Defender and Series vehicles

Bulkhead Outrigger Series 2A & Series 3 Ref: ZZPWBLR6
Description: The first chassis outrigger to which the bulkhead (dash assembly) is bolted. This outrigger is not handed.
Application: Series 2A and Series 3, both long and short wheelbase.
See position on chassis .....
Price: £32.89 (£39.47 Including VAT at 20%)

Fuel Tank Outrigger LH for SWB Ref: ZZPWBLR54LH
Description: Replacement fuel tank outrigger for front of left hand side mounted tank.
Application: Series2A and Series3 88" (SWB) when fitted with twin side mounted tanks. Standard on most military vehicles, optional on others.
See position on chassis .....
Price: £11.93 (£14.32 Including VAT at 20%)

Fuel Tank Outrigger SWB Right Hand Ref: ZZPWBLR54RH
Description: Replacement fuel tank outrigger for front of right hand mounted tank.
Application: Series2A and Series3 88" (SWB)
See position on chassis .....
Price: £11.93 (£14.32 Including VAT at 20%)

Rear of Rear Spring Hanger - Ser 2A & 3 SWB Ref: ZZPWBLR44
Description: Weld-on springer hanger complete with bush. This hanger is not handed.
Application: Series 2A and Series 3 SWB (88").
See position on chassis .....
Price: £16.79 (£20.15 Including VAT at 20%)

LH Footwell for Bulkhead Ref: ZZPWBLR19LH
Left hand footwell for Series2a & Series3 bulkhead for RHD vehicles. This is a 'weld in' part and consequently not a simple 'DIY' job.
Left hand drive version is available, please email us for further information.
Price: £17.59 (£21.11 Including VAT at 20%)

RH Footwell for RHD vehicles Ref: ZZPWBLR19R
Right hand footwell for Series2a & Series3 bulkhead for RHD vehicles. This is a 'weld in' part and consequently not a simple 'DIY' job.
Left hand drive version is available, please email us for further information.
Price: £17.95 (£21.54 Including VAT at 20%)

LH Door Pillar Reair Section Ref: ZZPWBLR60ALH
Left hand door pillar repair section and chassis bracket for Series2a, Series3 and Defender bulkheads. This is a 'weld in' part and consequently not a simple 'DIY' job.
Price: £55.82 (£66.98 Including VAT at 20%)

RH Door Pillar Repair Section Ref: ZZPWBLR60ARH
Left hand door pillar repair section and chassis bracket for Series2a, Series3 and Defender bulkheads. This is a 'weld in' part and consequently not a simple 'DIY' job.

Price: £55.82 (£66.98 Including VAT at 20%)

LH Top Corner Repair Section for Bulkhead Ref: ZZPWBLR62LH
Left hand top corner repair section for Series2a, Series3 and Defender bulkheads. This is a 'weld in' part and consequently not a simple 'DIY' job.
Price: £13.30 (£15.96 Including VAT at 20%)

RH Top Corner Repair Section for Bulkhead Ref: ZZPWBLR62RH
Left hand top corner repair section for Series2a, Series3 and Defender bulkheads. This is a 'weld in' part and consequently not a simple 'DIY' job.
Price: £13.30 (£15.96 Including VAT at 20%)

Replacement Spare Wheel Carrier for Rear Door Ref: ZZDA2215
Britpart spare wheel carrier for full height side hinged rear door.
Approximate dimensions: mounting plate 19cm x 17.5cm, carrier projects 23cm out from door.
Application: All Series2, Series3 and Defender models fitted with full height rear door to 2002.
Dismantled view of carrier .....
Price: £28.00 (£33.60 Including VAT at 20%)

Digital Dispensary > Body and Chassis Parts > Body and Chassis Repair parts > Defender and Series vehicles

Haven't found what you want? Then try our quotation service.

Main Pages

New Products

Overhaul Kit for DPA Injection Pump

£22.20

Application: Series 2A, Series 3 and early Defender with 2.25litre diesel engine.
Description: Replacement seal and gasket set containing approximately 70 items.
find out more

Diaphragm for DPS Injection Pump

£17.40

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Replacement diaphragm by 'SPACO'.
Approximate dimensions: Overall diameter 43.5mm(1.7"), internal diameter 7.5mm(0.3")
find out more

Overhaul Kit DPS Injection Pump

£54.00

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Kit by 'SPACO' containing gaskets, seals, rotor blades, washers, lockers etc
find out more

Return Spring DPS Injection Pump

£4.20

Application: Defender 2.5 diesel and 2.5 diesel turbo.
Description: Return spring for DPS injection pump.
Approximate dimensions: Coil diameter 24.6mm(1"), wire diameter 1.6mm(0.06")
find out more

Thermostat Housing

£28.50

Application: Freelander One 1.8 K16 Petrol, Discovery Two with TD5 and V8.
Description: Genuine thermostat housing with 3 outlets.
Approximate dimensions: Outlet diameters 35mm(1.4"), 35mm(1.4") and 34mm(1.3").
find out more

Radiator Top Hose TD4

£38.53

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine radiator top hose.
Approximate dimensions: Inside diameter one end 46mm(1.8") and 32mm(1.3") other end, length 40cm(15.7")
find out more

Heater Hose TD4

£26.64

Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine three way hose connecting engine to heater.
Approximate dimensions: Inside diameters of hoses 25mm(1"), 21mm(0.8") and 19mm(0.75")
find out more

Genuine Pollen Filter

£32.44

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Genuine pollen filter for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Pollen Filter by Mahle

£13.92

Application: Freelander One to 'YA' chassis numbers (approx 1999)
Description: Pollen filter by Mahle for early Freelander Ones.
Approximate dimensions: Length 275mm(10.8"), width 170mm(6.7"), depth 31mm(1.2")
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England) email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -

SearchQuest: Internet Marketing, SEO