Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Rubber Peg for Wiper Blade

Rubber Peg for Wiper Blade

0.95

Application: Series 1 1948 to 1958.

Decription: Rubber peg for retaining wiper blade to wiper arm.

Approximate dimensions: overall length 20.5mm(0.8")
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Brake Master Cylinder and Conversion Kit

Brake Master Cylinder and Conversion Kit

121.20

Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Back in stock.
find out more

Clutch Plate 9.5"

Clutch Plate 9.5

45.16

Application: Series 2A (optional use) and Series 3.

Description: 9.5" diameter clutch plate (friction disc) by AP Driveline (HB8117). 10 spline centre.

Approximate dimensions: overall diameter 240mm.

find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Grommet for Steering Column

Grommet for Steering Column

13.26

Application: Sewries 1.

Description: Reproduction lLarge grommet in bulkhead for steering column.

Approximate dimensions: Overall diameter 92mm(3.6"), column hole diameter 31mm(1.2").

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > DEFENDER Parts > Defender Steering Parts
Steering Box Right Hand Drive Ref: QAF500110
Application: Defender when fitted with '4 bolt' bolt steering box. Discovery 1 and Range Rover Classic. This box is supplied without a drop arm.
Description: Brand new 'Adwest' 4 bolt steering box. (The 4 bolts refer to the number of bolts holding top cover onto box, not the number of mounting bolts.)

Price: 457.19 (548.63 Including VAT at 20%)



Steering Box Right Hand Drive
Drop Arm RHD - Gemmer Ref: RTC6398
Application: Defender with Gemmer 6 bolt steering box.

Description: Replacement drop arm with ball joint (but not nut, washer and split pin) for use on Gemmer RHD steering boxes. Must not be fitted to Adwest 4 bolt and 3 bolt boxes as taper is different and will not fit properly. Consequenly can cause steering to fail.

Price: 17.25 (20.70 Including VAT at 20%)



Drop Arm RHD - Gemmer
Drop Arm RHD Adwest Ref: QFW000020
Application: Range Rover Classic, Defender and Discovery1 to 1993 approx.

Description: Genuine Adwest drop arm with ball joint (but not nut, washer or split pin) for Adwest right hand drive steering boxes. Suitable for both the Adwest heavy weight box (with 3 bolts holding top of steering box) and the Adwest light weight box (with 4 bolts holding top of steerng box).

Price: 79.20 (95.04 Including VAT at 20%)



Drop Arm RHD Adwest
Drop Arm Ball Joint Repair Kit Ref: RBG000010G
Application: Range Rover Classic, Defender and Discovery 1 to 1993 approx.
Description: Genuine Adwest drop arm ball joint rebuild kit. Suitable for both Adwest and Gemmer drop arms.

Price: 24.19 (29.03 Including VAT at 20%)



Drop Arm Ball Joint Repair Kit
Track Rod End - RH Thread Ref: RTC5869=
Application: Defender, Range Rover Classic, Discovery 1.

Description: Steering rod ball joint by Lemfoerder with right hand thread into rod. Supplied with castle nut, washer and split pin.

Approximate dimensions: 11/16"UNF thread to tube, length 10.8cm(4.25"), height 9.7cm(3.8").

Previous part numbers: GSJ151, GSJ205, NRC6007, RTC1800.


Price: 10.74 (12.89 Including VAT at 20%)





Related products:
1. Ball Joint Separator (Ref: ZZLAS2708)
Track Rod End - RH Thread
Track Rod End - LH Thread Ref: RTC5870=
Application: Defender and Discovery 1.

Description: Steering rod ball joint by Lemfoerder with left hand thread into rod. Supplied with castle nut, washer and split pin.

Approximate dimensions: 11/16"UNF thread to tube, length 10.8cm(4.25"), height 9.7cm(3.8").

Previous part numbers: GSJ202, NTC1887.


Price: 10.90 (13.08 Including VAT at 20%)





Related products:
1. Ball Joint Separator (Ref: ZZLAS2708)
Track Rod End - LH Thread
Clamp Kit for Steering Rods Ref: 577898KIT
Application: Series 1, Series 2, Series 3, Defender, Discovery 1, and Range Rover Classic.

Description: Clamp kit for retaining steering ball joints in ends of steering rods.

Approximate dimensions: Clamp measures 33.5mm(1.3") x 39mm(1.5") x 13.5mm(0.53"), bolt 1/4"UNF x 2" long.

Price: 1.00 (1.20 Including VAT at 20%)




People who bought this item also bought:
1. Steering Ball Joint Series 3 - LH thread (Ref: RTC5868=)
2. Steering Ball Joint Series 3 - RH thread (Ref: RTC5867=)
3. Felt Seal Stub Shaft to Drive Flange (Ref: RTC3515)
Clamp Kit for Steering Rods
Digital Dispensary > DEFENDER Parts > Defender Steering Parts

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Speedo Cable S3 4cylinder

Speedo Cable S3 4cylinder

9.60

Application: Series3 models with 4 cylinder engines. Suitable for both left hand drive and right hand drive.

Description: Reproduction speedo drive cable.

Approximate dimensions: Overall length 2.49m(98")


find out more

Parts Catalogue Range Rover 1992 to 1995

Parts Catalogue Range Rover 1992 to 1995

43.38

Application: Range Rover Classic from 1992 to 1995. Covering the following engines - 3.9V8, 4.2V8, 2.5VM, 200TDi and 300TDi.

Description: Reprint by Brookland Books with 484 pages.

Approximate dimensions: 297mm(11.7") tall, 210mm(8.3") wide and 26mm(1") thick.

find out more

Engine Stop Transfer

Engine Stop Transfer

2.34

Application: Series 3 diesel.

Description: Transfer reading 'Pull engine stop fully out before switching off'. Fixed to inside of windscreen.

find out more

Regulator for 17ACR Alternator

Regulator for 17ACR Alternator

8.40

Application: Range Rover Classic when fitted with 17ACR alternator.

Description: Lucas voltage regulator for alternator.

Alternative part numbers: UCB100, 14TR, 37581D, 607887

find out more

Vacuum Unit - 45D type

Vacuum Unit - 45D type

26.40

Application: Series3 and early Defender when fitted with Lucas 45D distributor.

Description: Lucas vacuum advance unit.

Approximate dimensions: Overall lengty 67mm(2.6"), diaphragm diameter 55mm(2.2").

find out more

Low Gear Wheel

Low Gear Wheel

31.80

Application: Series 1 and Series 2 - suffix A & B only.

Description: Low gear wheel with 39 teeth on output shaft in transfer box. Photo shows gear still coated in original wax, not all stock will come in this state.

Approximate dimensions: Thicness 33mm(1.3"), inside diameter 57mm(2.2"), outside diameter 14.5cm(5.7").


find out more

Throttle Pedal - Series 2 and 3

Throttle Pedal - Series 2 and 3

29.76

Application: Series 2 and Series 3 models.

Description: Throttle pedal.

Approximate dimensions: Overall length 22.5cm(8.9"), width 32mm(1.25")

find out more

SU Fuel Pump - Electronic Negative Earth

SU Fuel Pump - Electronic Negative Earth

122.82

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump with electronics instead points control, but otherwise to original pattern. For mounting in engine bay. For use on negative earth vehicles only. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -