Digital Dispensary

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Seal Kit for Brake Master Cylinder

Seal Kit for Brake Master Cylinder

19.80

Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524
find out more

Anchor Plate for 10inch brake shoes

Anchor Plate for 10inch brake shoes

8.44

Anchor plate for use with 10inch brakes - see kit above. One anchor plate is used with each pair of shoes. These do not need replacing with every change of brake shoes, but they do become worn over several years use. Sold singly.
Approximate dimensions: 78mm x 45mm x 5mm.

Application: see STC2796DKIT above.
find out more

Locking Tool - Fuel Injection Pump Sprocket

Locking Tool - Fuel Injection Pump Sprocket

9.90

Application: Defender 2007 to 2016 with Puma TDCi engine.

Description: Tool to lock sprocket of injection pump in position.

Approximate dimensions: Overall diameter 115mm(4.5"), inside diameter 69mm(2.7"), height 22mm(0.9").

find out more

Sundry Sale £00.01

0.01


find out more

Washer - Shock Absorber Fixing

Washer - Shock Absorber Fixing

0.56

Application: Series 2A and Series 3.

Description: Washer for retaining top of shock absorbers. Used with NRC7064 and 253826.

Approximate dimensions: Outside diameter 41mm(1.6"), inside diameter 12mm(0.47"), thickness 2.8mm(0.11").

find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Washer Shock Absorber Bush

Washer Shock Absorber Bush

0.30

Application: Series 1, Series 2 and Series 3 shock absorbers. Defender, Discovery 1 and Range Rover Classic anti-roll bar links.

Description: Replacement washer for retaining shock absorber to spring bottom plate.

Approximate dimensions: overall diameter 41mm(1 5/8"), inside diameter 21.5mm(0.85"), thickness 3.2mm(1/8").

Old part number: 264024

find out more

Split Pin - Shocker Retention

Split Pin - Shocker Retention

0.25

Application: Series 1, Series 2 and Series 3.

Description: Replacement split pin for retaining shock absorber to bottom plate of spring.

Approximate dimensions: Overall length 55.5mm(2.2"), diameter 6mm(0.24")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > DEFENDER Parts > Defender Fuel System
Page:  1  2  3   >   >>
CD175 Left Hand Carburetter Ref: ERC6362
Application: Defender V8.
Description: Stromberg CD175 left hand carburetter. Specification code 3994L
Only limited stock.

Price: 160.00 (192.00 Including VAT at 20%)



CD175 Left Hand Carburetter
Rebuild Kit for Stromberg CD175 Ref: ZZCDRK32
Application: Range Rover Classic 1976-1986, Defender 1982 - 1986, where fitted with twin CD175 carburetors.
Description: Rebuild kit for pair of CD175s. Contains all service items except the metering needles. These need to be ordered separately by carburetor specification number.


Price: 65.13 (78.16 Including VAT at 20%)





Related products:
1. Mixture Adjusting Tool CD175 (Ref: ZZB25860)
Rebuild Kit for Stromberg CD175
Float for CD175 Ref: 605833
Application: Rover V8 engines with CD175 carburetors.
Description: Genuine Zenith float.

Price: 9.50 (11.40 Including VAT at 20%)



Float for CD175
Twin 'SU' Carburetor Kit for V8 Ref: ZZFZX3010
Kit containing a pair of genuine SU carburetors plus all the fixings, adaptors etc to replace Stromberg CD175 carbs on V8 engines.


These kits are built to order and can take a few weeks to obtain.

Price: 575.00 (690.00 Including VAT at 20%)



Twin 'SU' Carburetor Kit for V8
Overhaul kit for Pair of HIF44 SU Carburetors Ref: ZZCRK268
Application: Rover V8 engine where fitted with twin HIF44 SU carburetors.
Description: Genuine SU boxed overhaul kit.

Price: 72.00 (86.40 Including VAT at 20%)



Overhaul kit for Pair of HIF44 SU Carburetors
Gasket Pack for SU HIF44 Carburetter Ref: WZX1505
Application: Rover V8 with SU HIF44 carbs.

Description: Original Equipment gasket pack to service one carburettor.

Price: 8.25 (9.90 Including VAT at 20%)



Gasket Pack for SU HIF44 Carburetter
Replacement Electric Fuel Pump - PRC3901 Ref: PRC3901
Facet electric petrol pump 476087N - made in the USA.

Application: Range Rover Classic 1974 to 1986, Series3 6cyl suffix B onwards, Series3 109V8, Defender 4cyl petrol and V8 with external fuel pump (up to about 1984/5)

Price: 60.80 (72.96 Including VAT at 20%)



Replacement Electric Fuel Pump - PRC3901
Replacement Fuel Pump - ETC7869 Ref: ETC7869
Application: Defender 2.5 Diesel with later type pump, 2.5 Turbo Diesel and 200TDI. Discovery 200TDi. Range Rover Classic 200TDi.

Description: Replacement mechanical lift pump made in England. This is the later type for the 2.5 Diesel, if your old pump does not look the same as this you will need the conversion kit STC1190.

Price: 28.50 (34.20 Including VAT at 20%)



Replacement Fuel Pump - ETC7869
Replacement Fuel Pump Kit Ref: STC1190D
Application: 2.5 litre naturally aspirated diesel, 2.5 litre turbo diesel, 200TDI. For use where existing pump does not look like ETC7869. (The original pump being no longer available).

Description: Replacement fule pump and fitting kit to allow fitting in place of original design of pump.

Price: 27.70 (33.24 Including VAT at 20%)



Replacement Fuel Pump Kit
Replacement Electric Fuel Pump - PRC7020 Ref: PRC7020
Replacement electric petrol pump of UK manufacture.

Application: Range Rover Classic 1986-1991 with carburettor V8, Defender 110 4cyl petrol and V8 with 'in tank' pump (from approx 1984/5 onwards).
This is the low pressure pump, it is not suitable for EFi engines.

Approximate dimensions: top plate diameter 80mm, in tank length 230mm.

Price: 40.42 (48.50 Including VAT at 20%)



Replacement Electric Fuel Pump - PRC7020
Digital Dispensary > DEFENDER Parts > Defender Fuel System
Page:  1  2  3   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -