Digital Dispensary

Product Sections


Best Sellers

'O' Ring for Thermostat

'O' Ring for Thermostat

0.55

Application: Series 1, 2 & 3 4cylinder engines.
Description: 'O' ring for sealing thermostat to cylinder head.
Approximate dimensions: outside diameter 55mm (2.2").
Original part number 01645
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Thermostat 82 degrees

Thermostat 82 degrees

10.61

Application: Series 1 1.6ltr & 2.0ltr petrol engines, Defender 2.5 & 2.5TD diesel engines.

Description: Waxstat 82degree thermostat.

Original part number: 504560.

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Fixings Kit for Water Pump

Fixings Kit for Water Pump

19.87

Application: Series One, 1948 to 1958.

Description: Set of fixings for water pump comprising the following parts;
6x 250517 bolt 1/4"BSF x 1.5", 1x 250518 bolt 1/4"BSF x 1.75", 1x 237150 bolt 1/4"BSF x 2.25", 2x set screw 5/16"BSW x 11/16" plus 8x 1/4" lock washers and 2x 5/16" lock washers.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > DEFENDER Parts > Defender Electrical Parts
Page:   <<   <  1  2  3  4
Starter for Rover V8 Ref: RTC6061N
Application: Range Rover Classic. Series 3 109V8, Defender, Discovery1 & 2, Range Rover 38A where fitted with Rover V8 from 3.5litre to 4.6litre.

Description: Denso manufasctured new starter. Replacement for earlier Lucas starters as well as later small bodied starters.

Approximate dimensdions: Overall length 24cm(9.5"), body diameter 7.4cm(2.9"), mounting bolt centres 118mm(4.65")

Price: 114.16 (136.99 Including VAT at 20%)



Starter for Rover V8
Starter Diesel by Bosch Ref: NAD500210B
Application: 2.25diesel, 2.5NAD, 2.5TD, 200TDi, 300TDi.

Description: Original Equipment starter motor by Bosch for the above diesel engines. Bosch part number 0 001109 413

This starter will work in place of the following part numbers: RTC5232, PRC3032, GEU4435, RTC5249, PRC4425, ERR5009, PRC5109.

Approximate dimensions: Overall length 25cm(10").

Price: 226.65 (271.98 Including VAT at 20%)



Starter Diesel by Bosch
Starter TD5 Ref: NAD101240=
Application: Defender and Discovery 2 where fitted with TD5 engine.

Description: Denso original equipment starter motor.

Approximate dimensions: Overall length 22cm(8.7")

Price: 153.00 (183.60 Including VAT at 20%)



Starter TD5
Horn High Note Ref: YEB10026
Application: Defender, Discovery 1 and Range Rover Classic.

Description: OEM specification high note horn.

Approximate dimensions: 91mm(3.6") x 106mm(4.2") x 90mm(3.5")

Price: 7.25 (8.70 Including VAT at 20%)



Horn High Note
Horn Low Note Ref: YEB10027
Application: Series 3, Defender, Discovery 1 and Range Rover Classic.

Description: OEM specification horn low note (410Hz)

Approximate dimensions: 91mm(3.6") x 106mm(4.2") x 90mm(3.5")

Previous part numbers: PRC6322, RTC6461, RTC3368

Price: 7.25 (8.70 Including VAT at 20%)




People who bought this item also bought:
1. Cylinder Head Gasket 4cyl Petrol Engine (Ref: ERC6380=)
2. Oil Pressure Switch (Ref: 90519864)
3. Thermostat 74 degrees (Ref: 532453)
Horn Low Note
Wiper Motor Ref: RTC3867
Application: Late Series 2A, Series 3, Range Rover Classic rear, Defender to 2001.

Description: Replacement wiper motor supplied with parking switch but NOT with gear and link arm. 12 volt, 14 watt

Price: 52.72 (63.26 Including VAT at 20%)



Wiper Motor
Wiper Drive Cable Ref: RTC202
Application: Series 3 and Defender to 2001.

Description: Genuine wiper drive cable (also know as wiper rack).

Approximate dimensions: Overall length 1.51m(5').

Price: 15.85 (19.02 Including VAT at 20%)



Wiper Drive Cable
Wiper Wheel Box Ref: PRC8495
Application: Series 3 and early Defender.

Description: UK made wheel box for wiper system.

Approximate dimensions: Mounting centres 60.5mm(2.4"), length 94mm(3.7"). width 74.5mm(2.9").

Price: 18.00 (21.60 Including VAT at 20%)



Wiper Wheel Box
Adaptor for Wiper Arm Ref: STC987D
Application: Defender, Series 3 with modification.

Description: Replacement adaptor piece between wheelbox spindle and wiper arm, also known as 'splined drum'. Will also fit Series 3 if a flat is filed on to the spindle shaft. Supplied with grub screw.

Approximate dimensions: Length 20mm(0.8"), overall diameter 19mm(0.75").


Price: 1.80 (2.16 Including VAT at 20%)



Adaptor for Wiper Arm
Non-return Valve Ref: AMR6676
Application: Freelander One, Defender, Discovery Two, Freelander Two, Range Rover 38A 1995 to 2002.
Description: In-line non-return valve for wash/wipe systems.

Price: 2.37 (2.84 Including VAT at 20%)



Non-return Valve
Digital Dispensary > DEFENDER Parts > Defender Electrical Parts
Page:   <<   <  1  2  3  4

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Locking Hasp for Fuel Cap

Locking Hasp for Fuel Cap

4.50

Application: Series 2a and Series 3.

Description: Locking hasp for fuel cap with 'ears'. Allows use of padlock to secure fuel cap.

Approximate dimensions: Mounting screw centres 70mm(2.75")

Old part number: GLR361

find out more

Bail Assembly

Bail Assembly

2.70

Application: Series 2A and Series 3.

Description: Retainer for glass bowl on side of lift pump on 4 cylinder models.

Approximate dimensions: Overall length 92mm, width 58mm.

find out more

Fuel Filler Cap

Fuel Filler Cap

26.46

Application: Series 2a and Series 3.

Description: Old stock Unipart 2 lug fuel filler cap. Supplied with seal,

Approximate dimensions: Overa;; diameter 96mm(3.8").

find out more

6 Way Lighting Switch - Military

6 Way Lighting Switch - Military

153.60

Application: Series3, Light Weight, 101 and Defender military models.

Description: Old stock Lucas 34259 six way lighting swith with facility for lock barrel (not supplied).


find out more

Bypass Hose Series 1 1948-1953

Bypass Hose Series 1 1948-1953

8.70

Application: Series 1 1948 to 1953 with 1.6 litre and early 2 litre engines.

Description: Reproduction bypass hose.

Approximate dimensions: Overall length 88mm(3.5"), outside diameter 45mm(1.8"), inside diameter 34mm(1.3")

find out more

Engine Breather-Filter

Engine Breather-Filter

22.69

Application: Defender with 2.5litre naturally aspirated diesel engine.

Description: Breather cap on top of rocker cover with single pipe outlet of 19mm diameter.

find out more

Installer Oil Seal

Installer Oil Seal

131.21

Application: Freelander2 and Evoque.

Description: Installer for oil seal. Beleived to be on front differential.

Approximate dimensions: Overall length 19.4cm(7.6"), overall diameter 90mm(3.5")

find out more

Remover Pinion Oilseal

Remover Pinion Oilseal

140.81

Application: Freelander 2 and Evoque.

Description: Remover for pinion oilseal. Use with slide hammer LRT-99-004.

Approximate dimensions: Overall length 14cm(5.5")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -