Digital Dispensary

Product Sections


Best Sellers

Gasket Set for Solex 32PBI-2 Carburettor

Gasket Set for Solex 32PBI-2 Carburettor

7.66

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor.
Description: Set of 6 gaskets and 8 fibre washers for this carburettor
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Differential Pinion

Oil Seal Differential Pinion

5.21

Application: Series 1, 2 & 3 Rover type differentials.

Description: Oil seal to nose of differential. Corteco/Gaco boxed.

Approximate dimensions: outside diameter 70mm (2.76"), thickness 12.5mm (0.5").

Original part number: 217507.
find out more

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Gasket for Differential to Axle Casing

Gasket for Differential to Axle Casing

0.60

Application: Rover type differentials on Series 1, 2 & 3. Range Rover Classic, Defender and Discovery 1.
Description: replacement gasket for differential assembly to axle casing.
Approximate dimensions: overall diameter 24.4cm (9.6")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > DEFENDER Parts > Defender Electrical Parts
Page:   <<   <  1  2  3  4  5   >   >>
Battery Isolator Switch Ref: ZZGCU001
Application: Fairly universal.
Description: Battery isolator switch. Can be used as an additional security feature on early models (but not on later vehicles with excessive electronics as isolating battery may well disrupt normal functions on reconnection).
Can also be used for isolating auxilliary equipment such as winches etc.

Price: 4.54 (5.45 Including VAT at 20%)



Battery Isolator Switch
Bulb Holder Single Pole Ref: XBP100180
Application: Defender 1995 onwards, Discovery One, Discovery Two, Range Rover Two(38A) Freelander One.
Description: Bulb holder for single filament one pole bulbs. 2pin connector. Takes ZZLRA102 connector kit.
Approximate dimensions: overall length 45mm(1.8"), overall diameter 40mm(1.6")

Price: 1.85 (2.22 Including VAT at 20%)





Related products:
1. Connector Kit for Bulb Holders (Ref: ZZLRA102)
Bulb Holder Single Pole
Bulb Holder Two Pole Ref: XBP100190
Application: Defender 1994 onwards, Freelander One, Range Rover 38A 1995 to 2002.
Description: Bulb holder takes twin filament stop/tail bulb type 380. 3 pin base takes connector kit ZZLRA103.
Approximate dimensions: overall diameter 40.5mm(1.6"), overall length 46mm(1.8")

Price: 2.19 (2.63 Including VAT at 20%)





Related products:
1. Connector Kit for Bulb Holder - 2 pole (Ref: ZZLRA103)
Bulb Holder Two Pole
Bulb Holder - Defender Instruments Ref: ZZAS614
Application: Series 3 warning lamps in speedometer head, Defender instrument illumination.
Description: Plastic push-in bulb holder with 2 contacts to suit 12.5mm (0.5") tube. Supplied with 504 capless bulb.

Price: 2.20 (2.64 Including VAT at 20%)



Bulb Holder - Defender Instruments
V8 Waterproofing Kit Ref: ZZBA2840
Application: All V8 models with distributor ignition.

Description: Molded rubber boots for distributor and coil. Supplied with cable ties.

Price: 37.15 (44.58 Including VAT at 20%)



V8 Waterproofing Kit
Distributor Cap Lucas V8 Ref: STC8368
Application: All Rover V8 engines when fitted with Lucas distributor.
Description: Lucas DDB107 distributor cap.
Approximate dimensions: Overall diameter 105mm, height 75mm.

Price: 10.95 (13.14 Including VAT at 20%)




People who bought this item also bought:
1. Rotor Arm Lucas V8 (Ref: STC1857)
2. Float for CD175 (Ref: 605833)
3. Clutch Slave Cylinder - R380 Gearbox (Ref: FTC5072)
Distributor Cap Lucas V8
Rotor Arm Lucas V8 Ref: STC1857
Application: Electronic ignition versions of Lucas V8 Distributor.
Description: Portugues made rotor arm supposedly on original Lucas tooling. (Original Lucas item is no longer available and these are no longer in production).
Approximate dimensions: length 70.5mm (2.8"), height 24.2mm (0.95"), spindle diameter 14.6mm (0.57").

Price: 12.40 (14.88 Including VAT at 20%)




People who bought this item also bought:
1. Distributor Cap Lucas V8 (Ref: STC8368)
2. Float for CD175 (Ref: 605833)
3. Clutch Slave Cylinder - R380 Gearbox (Ref: FTC5072)
Rotor Arm Lucas V8
Replacement Rotor Arm Lucas 35D Distributor Ref: STC1857D
Application: Electronic ignition versions of Lucas V8 Distributor.
Description: Intermotor (sometimes branded Lucas) rotor arm. Reasonable quality reflected by price.
Approximate dimensions: length 70.5mm (2.8"), height 24.2mm (0.95"), spindle diameter 14.6mm (0.57").

Price: 5.00 (6.00 Including VAT at 20%)



Replacement Rotor Arm Lucas 35D Distributor
Copy of Ducellier Distributor Ref: ERC6986D
Application: All Series 2A and Series 3 four cylinder petrol engines. Also 90/110 2.25 petrol engines.
Description: Complete distributor which is a good copy of the Ducellier.

Price: 73.33 (88.00 Including VAT at 20%)




People who bought this item also bought:
1. Condensor Ducellier (Ref: RTC6620)
2. Spark Plug Champion N12YC (Ref: RTC3570)
3. Contact Breakers Lucas 25D (Ref: RTC3270)
Copy of Ducellier Distributor
Service Kit for Ducellier Distributor Ref: DISTSERVKIT03
Application: Ducellier 4cylinder distributor as fitted to Series 2A and Series 3 petrol engines.
Description: Kit containing cap - RTC4932, rotor arm - RTC4933, contact breakers (points) - RTC6625 and condensor - RTC6620.
See below for specification of kit components.

Price: 8.50 (10.20 Including VAT at 20%)



Service Kit for Ducellier Distributor
Digital Dispensary > DEFENDER Parts > Defender Electrical Parts
Page:   <<   <  1  2  3  4  5   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Outer Pinion Bearing

Outer Pinion Bearing

10.72

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for outer end of differential pinion gear. Timken bearing numbers HM88046/HM88010

Approximate dimensions: Outside diameter 2.7"(68.5mm), inside diameter 1.25"(31.8mm)., height 0.93"(23.5mm).


find out more

Inner Pinion Bearing - Differential

Inner Pinion Bearing - Differential

21.70

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for inner end of differential pinion gear. Timken bearing numbers HM801346X/HM801310

Approximate dimensions: Outside diameter 3.25"(82.5mm), inside diameter 1.5"(38mm)., height 1.22"(31mm).

find out more

Seal Kir for 1 1/8" Wheel Cylinders

Seal Kir for 1 1/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for rear wheel cylinders with bore of 1 1/8"(28.5mm). Kit has sufficient seals for both front wheel cylinders.

find out more

Seal Kit for 1 3/8" Wheel Cylinders

Seal Kit for 1 3/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for front wheel cyliders with bore of 1 3/8"(35mm). Kit has sufficient seals for both front wheel cylinders.


find out more

Outlet Nozzle - SU Fuel Pump

Outlet Nozzle - SU Fuel Pump

4.44

Application: Series 1 and early Series 2 models.

Description: Nozzle for outlet of SU fuel pumps. Allows push-on fuel hose connection to pump.

Approximate dimensions: Thread diameter 22mm(0.87"), nozzle diameter 7mm(0.28").

find out more

Wiper Arm Series 3 RH

Wiper Arm Series 3 RH

24.25

Application: Series3 models.

Description: Right hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -