Digital Dispensary

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Seal Kit for Brake Master Cylinder

Seal Kit for Brake Master Cylinder

19.80

Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524
find out more

Anchor Plate for 10inch brake shoes

Anchor Plate for 10inch brake shoes

8.44

Anchor plate for use with 10inch brakes - see kit above. One anchor plate is used with each pair of shoes. These do not need replacing with every change of brake shoes, but they do become worn over several years use. Sold singly.
Approximate dimensions: 78mm x 45mm x 5mm.

Application: see STC2796DKIT above.
find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Inner Wheel Hub Seal

Inner Wheel Hub Seal

4.28

Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Split Pin - Shocker Retention

Split Pin - Shocker Retention

0.25

Application: Series 1, Series 2 and Series 3.

Description: Replacement split pin for retaining shock absorber to bottom plate of spring.

Approximate dimensions: Overall length 55.5mm(2.2"), diameter 6mm(0.24")

find out more

Dust Cap for Bleed Screw

Dust Cap for Bleed Screw

0.30

Application: Suitable for all bleed screws.
Description: Soft plastic dust cap for bleed screws.
Approximate dimensions: length 15mm(0.6"), diameter 8mm (0.3")
Original part number 234957
find out more

Screw for retaining Brake Drums

Screw for retaining Brake Drums

0.25

Application: Series 1, 2 & 3.
Description: Countersunk head screw 3/8"BSW by 5/8" long.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > FREELANDER 1 Parts > Cooling & Heating for Freelander 1
Page:  1  2   >   >>
Intercooler Hose TD4 Ref: PNH000020
Application: Freelander One with M47 (TD4) diesel engine.
Description: Genuine Hose from intercooler to inlet manifold.
Approximate dimensions: Overall length 44.5cm(17.5"), inside diameter 4.7cm(1.85")

Price: 26.14 (31.37 Including VAT at 20%)



Intercooler Hose TD4
Hose Intercooler to Turbo Ref: PNH500190
Application: Freelander 1 with TD4 engine from 2003 onwards.
Description: Genuine intercooler hose with sensor.
Approximate dimensions: Overall length 51cm( 20"), internal diameter 48mm(1.9"), external diameter 60mm(2.4")

Price: 49.51 (59.41 Including VAT at 20%)



Hose Intercooler to Turbo
Air Bleed Hose Assembly Ref: PEH101210
Application: Freelander One with petrol (gasolene) engines.
Description: Genuine air bleed hose and 'tee' peice assembly. Allows air from top of radiator to escape to expansion bottle.
Approximate dimensions: Overall length 44cm(17.3"), inside diameter 20mm(0.8")

Price: 12.40 (14.88 Including VAT at 20%)



Air Bleed Hose Assembly
Cap Expansion Tank Ref: PCD100160
Application: Freelander 1 to 2002, Defender from 1999.
Description: Plastic cap for expansion bottle. This fits the original bottle on Freelander up to 2002.
Approximate dimensions:outside diameter 55mm(2.2"), inside diameter 45mm(1.8").

Price: 7.47 (8.96 Including VAT at 20%)



Cap Expansion Tank
Radiator Top Hose 1.8 Petrol Ref: PCH117860
Application: Freelander One with 1.8 petrol engine from '1A' (approx 2001).
Description: Top coolant hose.
Approximate dimensions: Inside diameter 40mm(1.6"), length 72cm(28")

Price: 22.08 (26.50 Including VAT at 20%)



Radiator Top Hose 1.8 Petrol
Replacement Radiator Top Hose Ref: PCH117860D
Application: Freelander One with 1.8 petrol engine from '1A' (approx 2001).
Description: Replacement top coolant hose. Supplied without clips.
Approximate dimensions: Inside diameter 40mm(1.6"), length 72cm(28")

NB Photograph is of genuine hose, replacement will differ slightly to photo and is supplied without hose clips.

Price: 5.95 (7.14 Including VAT at 20%)



Replacement Radiator Top Hose
Radiator Top Hose TD4 Ref: PCH118131
Application: Freelander One with TD4 (M47) BMW engine.
Description: Genuine radiator top hose.
Approximate dimensions: Inside diameter one end 46mm(1.8") and 32mm(1.3") other end, length 40cm(15.7")

Price: 32.11 (38.53 Including VAT at 20%)



Radiator Top Hose TD4
Coolant Hose Assembly 1.8 Petrol Ref: PCH001190D
Application: Freelander One with 1.8 petrol engine from approx 2000 to 2005.
Description: Replacement coolant hose assembley comprising thermostat housing (PEL500110) and five hoses.

Price: 42.86 (51.43 Including VAT at 20%)



Coolant Hose Assembly 1.8 Petrol
Thermostat Housing - Genuine Ref: PEL500110
Application: Freelander One 1.8 K16 Petrol, Discovery Two with TD5 and V8.

Description: Genuine thermostat housing with 3 outlets.

Approximate dimensions: Outlet diameters 35mm(1.4"), 35mm(1.4") and 34mm(1.3").

Price: 37.94 (45.53 Including VAT at 20%)



Thermostat Housing - Genuine
Thermostat Housing - O E Ref: Pel500110=
Application: Freelander One 1.8 K16 Petrol, Discovery Two with TD5 and V8.

Description: Original equipment thermostat housing with 3 outlets.

Approximate dimensions: Outlet diameters 35mm(1.4"), 35mm(1.4") and 34mm(1.3").

Price: 23.75 (28.50 Including VAT at 20%)



Thermostat Housing - O E
Digital Dispensary > FREELANDER 1 Parts > Cooling & Heating for Freelander 1
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -