Digital Dispensary

Product Sections


Best Sellers

Gasket Set for Solex 32PBI-2 Carburettor

Gasket Set for Solex 32PBI-2 Carburettor

7.66

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor.
Description: Set of 6 gaskets and 8 fibre washers for this carburettor
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Differential Pinion

Oil Seal Differential Pinion

5.21

Application: Series 1, 2 & 3 Rover type differentials.

Description: Oil seal to nose of differential. Corteco/Gaco boxed.

Approximate dimensions: outside diameter 70mm (2.76"), thickness 12.5mm (0.5").

Original part number: 217507.
find out more

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Gasket for Differential to Axle Casing

Gasket for Differential to Axle Casing

0.60

Application: Rover type differentials on Series 1, 2 & 3. Range Rover Classic, Defender and Discovery 1.
Description: replacement gasket for differential assembly to axle casing.
Approximate dimensions: overall diameter 24.4cm (9.6")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:   <<   <  1  2  3   >   >>
Copy of Zenith 36IV Ref: ERC2886D
Application: Series 2, 2A and 3 when fitted with 2.25 litre petrol engine.
Description: Chinese manufactured copy of the Zenith 36IV. Appears to be very well made and we are hopeful that these carburetors will live up to their promise.

Price: 60.50 (72.60 Including VAT at 20%)



Copy of Zenith 36IV
Overhaul kit for Zenith 36IV Ref: 605092
Zenith boxed kit for rebuilding the 36IV carburetor as fitted to the 4cyl 2.25ltr petrol engine in late Series2A and Series3.
Kit contains: 4x gaskets, 1x O ring, 1x diaphragm and spring, throttle disc, spindle and screws, float jet, choice of slow running screws, plus numerous small fixings.

Price: 29.02 (34.82 Including VAT at 20%)



Overhaul kit for Zenith 36IV
Gasket Set for Zenith 36IV Ref: 605093A
Zenith bagged gasket set for the 36IV carburetor as fitted to the 4cyl 2.25ltr petrol engine in late Series2A and Series3.
Kit contains: 4x gaskets, 1x O ring and numerous washers.

Price: 7.66 (9.19 Including VAT at 20%)



Gasket Set for Zenith 36IV
Float for Zenith 36IV Carburetor Ref: 601858
Application: Series 2A and Series 3 2.25 petrol (gasolene) engine where fitted with the Zenith 36IV carburetor.
Description: Original equipment float for the Zenith 36IV.

Price: 15.67 (18.80 Including VAT at 20%)



Float for Zenith 36IV Carburetor
Diaphragm kit for Zenith 36IV Ref: ZZB17333
Application: Series 2A and Series 3 2.25 petrol (gasolene) engine where fitted with the Zenith 36IV carburetor.
Description: Kit of diaphragm, spring ang gaskets for replacing accelerator diaphram on 36IV.

Price: 7.00 (8.40 Including VAT at 20%)



Diaphragm kit for Zenith 36IV
Service Kit for CD175CDSE Ref: 606098
Application: Series 2A and Series 3 with 2.6litre 6cylinder engine.

Description: Original Zenith service kit for the Stromberg CD175CDSE carburettor fitted to some of the 6 cylinder petrol engines. This kit is for the 3618 specification carburettor part number 598110

Price: 23.43 (28.12 Including VAT at 20%)



Service Kit for CD175CDSE
CD175 Left Hand Carburetter Ref: ERC6362
Application: Defender V8.
Description: Stromberg CD175 left hand carburetter. Specification code 3994L
Only limited stock.

Price: 160.00 (192.00 Including VAT at 20%)



CD175 Left Hand Carburetter
Rebuild Kit for Stromberg CD175 Ref: ZZCDRK32
Application: Range Rover Classic 1976-1986, Defender 1982 - 1986, where fitted with twin CD175 carburetors.
Description: Rebuild kit for pair of CD175s. Contains all service items except the metering needles. These need to be ordered separately by carburetor specification number.


Price: 65.13 (78.16 Including VAT at 20%)




People who bought this item also bought:
1. Rotor Arm Lucas V8 (Ref: STC1857)
2. Float for CD175 (Ref: 605833)
3. Clutch Slave Cylinder - R380 Gearbox (Ref: FTC5072)


Related products:
1. Mixture Adjusting Tool CD175 (Ref: ZZB25860)
Rebuild Kit for Stromberg CD175
Float for CD175 Ref: 605833
Application: Rover V8 engines with CD175 carburetors.
Description: Genuine Zenith float.

Price: 9.50 (11.40 Including VAT at 20%)




People who bought this item also bought:
1. Distributor Cap Lucas V8 (Ref: STC8368)
2. Clutch Slave Cylinder - R380 Gearbox (Ref: FTC5072)
3. Replacement Electric Fuel Pump - PRC3901 (Ref: PRC3901)
Float for CD175
Twin 'SU' Carburetor Kit for V8 Ref: ZZFZX3010
Kit containing a pair of genuine SU carburetors plus all the fixings, adaptors etc to replace Stromberg CD175 carbs on V8 engines.


These kits are built to order and can take a few weeks to obtain.

Price: 575.00 (690.00 Including VAT at 20%)



Twin 'SU' Carburetor Kit for V8
Page:   <<   <  1  2  3   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Outer Pinion Bearing

Outer Pinion Bearing

10.72

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for outer end of differential pinion gear. Timken bearing numbers HM88046/HM88010

Approximate dimensions: Outside diameter 2.7"(68.5mm), inside diameter 1.25"(31.8mm)., height 0.93"(23.5mm).


find out more

Inner Pinion Bearing - Differential

Inner Pinion Bearing - Differential

21.70

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for inner end of differential pinion gear. Timken bearing numbers HM801346X/HM801310

Approximate dimensions: Outside diameter 3.25"(82.5mm), inside diameter 1.5"(38mm)., height 1.22"(31mm).

find out more

Seal Kir for 1 1/8" Wheel Cylinders

Seal Kir for 1 1/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for rear wheel cylinders with bore of 1 1/8"(28.5mm). Kit has sufficient seals for both front wheel cylinders.

find out more

Seal Kit for 1 3/8" Wheel Cylinders

Seal Kit for 1 3/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for front wheel cyliders with bore of 1 3/8"(35mm). Kit has sufficient seals for both front wheel cylinders.


find out more

Outlet Nozzle - SU Fuel Pump

Outlet Nozzle - SU Fuel Pump

4.44

Application: Series 1 and early Series 2 models.

Description: Nozzle for outlet of SU fuel pumps. Allows push-on fuel hose connection to pump.

Approximate dimensions: Thread diameter 22mm(0.87"), nozzle diameter 7mm(0.28").

find out more

Wiper Arm Series 3 RH

Wiper Arm Series 3 RH

24.25

Application: Series3 models.

Description: Right hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -