Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Rubber Peg for Wiper Blade

Rubber Peg for Wiper Blade

0.95

Application: Series 1 1948 to 1958.

Decription: Rubber peg for retaining wiper blade to wiper arm.

Approximate dimensions: overall length 20.5mm(0.8")
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Brake Master Cylinder and Conversion Kit

Brake Master Cylinder and Conversion Kit

121.20

Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Back in stock.
find out more

Clutch Plate 9.5"

Clutch Plate 9.5

45.16

Application: Series 2A (optional use) and Series 3.

Description: 9.5" diameter clutch plate (friction disc) by AP Driveline (HB8117). 10 spline centre.

Approximate dimensions: overall diameter 240mm.

find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Grommet for Steering Column

Grommet for Steering Column

13.26

Application: Sewries 1.

Description: Reproduction lLarge grommet in bulkhead for steering column.

Approximate dimensions: Overall diameter 92mm(3.6"), column hole diameter 31mm(1.2").

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Brake Parts for Land Rover Series 2 and 3
Page:  1  2  3  4  5  ...   >   >>
Axle Set of Brake Shoes - 10" Ref: STC2796DKIT
Axle set of 4 10inch brake shoes by Lucas-TRW plus 4x pull-off springs, 6x imperial brake drum screws, 2x metric brake drum screws, 2 locking plates and 4 screws for anchor plates.

Application: Series1 80", 86" & 88" front and rear axles, Series 2/2A SWB front and rear, Series3 SWB front and rear to June 1980, Series3 SWB rear only from July 1980, Defender 90 rear to 1994.

Previous part numbers for shoes: RTC3411, GBS728, 505675, 505676

Price: 28.28 (33.94 Including VAT at 20%)




People who bought this item also bought:
1. Wheel Nut (Ref: 217361)
2. Felt Seal Stub Shaft to Drive Flange (Ref: RTC3515)
3. Flange Gasket (Ref: 231505=)
Axle Set of Brake Shoes - 10
Anchor Plate for 10inch brake shoes Ref: 236993
Anchor plate for use with 10inch brakes - see kit above. One anchor plate is used with each pair of shoes. These do not need replacing with every change of brake shoes, but they do become worn over several years use. Sold singly.
Approximate dimensions: 78mm x 45mm x 5mm.

Application: see STC2796DKIT above.

Price: 7.03 (8.44 Including VAT at 20%)




People who bought this item also bought:
1. 27mm Wheel Nut Socket (Ref: ZZLAS2016)
2. Steering Box Repair Kit (Ref: STRGBOXKIT01)
3. Replacement Water Pump S2a & S3 (Ref: STC3758D)
Anchor Plate for 10inch brake shoes
Locker for Anchor Plate Ref: 236995
Application: Series 1, 2 & 3 with 10" brakes.
Description: Locker for brake shoe anchor plate.
Approximate dimensions: 3.8cm(1.5") long by 1cm(3/8") wide by 1mm(0.040") thick.

Price: 1.02 (1.22 Including VAT at 20%)




People who bought this item also bought:
1. 27mm Wheel Nut Socket (Ref: ZZLAS2016)
2. Replacement Water Pump S2a & S3 (Ref: STC3758D)
3. Nut and Bolt Kit for Propshafts (Ref: PROPFIX01)
Locker for Anchor Plate
Return Spring - Brake Shoes 10" Ref: 218983
Application: Series 1, 2 & 3 with 10" brakes. Also Defender 90 to 1994.

Description: Lower pull-off spring across both shoes.

Approximate dimensions: overall length 87mm(3.4")

Price: 0.50 (0.60 Including VAT at 20%)




People who bought this item also bought:
1. Return Spring - Leading Shoe 10" (Ref: 503981)
2. Gasket Exhaust Manifold to Down Pipe (Ref: 213358)
3. Clevis for Hand Brake Linkage (Ref: 215809)
Return Spring - Brake Shoes 10
Return Spring - Leading Shoe 10" Ref: 503981
Application: Series 1, 2 & 3 with 10" brakes. Also Defender 90 to 1994.

Description: Upper pull-off spring operating on leading shoe only.

Approximate dimensions: overall length 126mm(5").

Price: 0.50 (0.60 Including VAT at 20%)




People who bought this item also bought:
1. Return Spring - Brake Shoes 10" (Ref: 218983)
2. Locker for Stub Axle (Ref: 277311D)
3. Gasket Exhaust Manifold to Down Pipe (Ref: 213358)
Return Spring - Leading Shoe 10
Return Spring Front Brakes 11" Ref: 234889
Application: Series 2A and Series 3 with 11" diameter front brake drums.

Description: Pull-off spring for front brake shoes. Used on both standard width and wide (3") front brake shoes.

Approximate dimensions: overall length 105mm(4.1"), coil diameter 14.5mm(0.6")

Price: 0.80 (0.96 Including VAT at 20%)




People who bought this item also bought:
1. Axle Set of Brake Shoes - 11" Front (Ref: STC3944DKIT)
2. Spring Bush for 2.5" wide Springs (Ref: 548205)
3. Return Spring - Leading Shoe 10" (Ref: 503981)
Return Spring Front Brakes 11
Return Spring Lower 11" Rear Ref: 531893D
Application: Series 2A 109, Series 3 109 and Defender 110/130 to 1993.

Description: Replacement lower pull-off spring for 11" diameter drum brakes on rear axle.

Approximate dimensions: overall length 140mm(5.5")

Price: 0.85 (1.02 Including VAT at 20%)



Return Spring Lower 11
Return Spring Upper 11" Rear Ref: 548169D
Application: Series 2A 109, Series 3 109 and Defender 110/130 to 1993.

Description: Replacement upper pull-off spring for 11" diameter drum brakes on rear axle.

Approximate dimensions: overall length 180mm(7.1")

Price: 0.85 (1.02 Including VAT at 20%)



Return Spring Upper 11
Return Spring for Hand Brake Shoes Ref: FRC8549D
Application: Series 2A and Series 3 1960 to 1984.

Description: Replacement pull off spring for hand brake shoes.

Approximate dimensions: overall length 125mm(4.9"), coil diameter 15mm(0.6"), wire diameter 2.4mm(0.1")

Old part numbers: FRC3234 and 515465.

Price: 0.85 (1.02 Including VAT at 20%)



Return Spring for Hand Brake Shoes
Axle Set of Brake Shoes - 11 inch Rear Ref: STC2797DKIT
Axle set of 4 11inch brake shoes by Mintex plus 4x pull-off springs, 6x imperial brake drum screws and 2x metric brake drum screws.
Application: Rear axle on the following models, Series 2A LWB, Ser 3 LWB and Defender 110 to 1994.

Previous part numbers: RTC3418, STC359, GBS805

Price: 37.09 (44.51 Including VAT at 20%)



Axle Set of Brake Shoes - 11 inch Rear
Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Brake Parts for Land Rover Series 2 and 3
Page:  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Door Mirror Right Hand

Door Mirror Right Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Speedo Cable S3 4cylinder

Speedo Cable S3 4cylinder

9.60

Application: Series3 models with 4 cylinder engines. Suitable for both left hand drive and right hand drive.

Description: Reproduction speedo drive cable.

Approximate dimensions: Overall length 2.49m(98")


find out more

Parts Catalogue Range Rover 1992 to 1995

Parts Catalogue Range Rover 1992 to 1995

43.38

Application: Range Rover Classic from 1992 to 1995. Covering the following engines - 3.9V8, 4.2V8, 2.5VM, 200TDi and 300TDi.

Description: Reprint by Brookland Books with 484 pages.

Approximate dimensions: 297mm(11.7") tall, 210mm(8.3") wide and 26mm(1") thick.

find out more

Engine Stop Transfer

Engine Stop Transfer

2.34

Application: Series 3 diesel.

Description: Transfer reading 'Pull engine stop fully out before switching off'. Fixed to inside of windscreen.

find out more

Regulator for 17ACR Alternator

Regulator for 17ACR Alternator

8.40

Application: Range Rover Classic when fitted with 17ACR alternator.

Description: Lucas voltage regulator for alternator.

Alternative part numbers: UCB100, 14TR, 37581D, 607887

find out more

Vacuum Unit - 45D type

Vacuum Unit - 45D type

26.40

Application: Series3 and early Defender when fitted with Lucas 45D distributor.

Description: Lucas vacuum advance unit.

Approximate dimensions: Overall lengty 67mm(2.6"), diaphragm diameter 55mm(2.2").

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -