Digital Dispensary

Product Sections


Best Sellers

Gasket Set for Solex 32PBI-2 Carburettor

Gasket Set for Solex 32PBI-2 Carburettor

7.66

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor.
Description: Set of 6 gaskets and 8 fibre washers for this carburettor
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Differential Pinion

Oil Seal Differential Pinion

5.21

Application: Series 1, 2 & 3 Rover type differentials.

Description: Oil seal to nose of differential. Corteco/Gaco boxed.

Approximate dimensions: outside diameter 70mm (2.76"), thickness 12.5mm (0.5").

Original part number: 217507.
find out more

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Gasket for Differential to Axle Casing

Gasket for Differential to Axle Casing

0.60

Application: Rover type differentials on Series 1, 2 & 3. Range Rover Classic, Defender and Discovery 1.
Description: replacement gasket for differential assembly to axle casing.
Approximate dimensions: overall diameter 24.4cm (9.6")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:   <<   <  1  2  3  4   >   >>
Brass Male Union for 3/16" Pipe Ref: ZZHU09
Brass male union for 3/16" diameter pipe. Thread M12 x 1mm, 1/2" AF spanner size, overall length 0.86"(22mm)

Price: 2.78 (3.34 Including VAT at 20%)



Brass Male Union for 3/16
Brass Male Union for 3/16" Pipe Ref: ZZHU11
Brass male union for 3/16" diameter pipe. 7/16"UNF x 24TPI thread, 1/2"AF spanner size, overall length 23mm(0.9")

Price: 2.78 (3.34 Including VAT at 20%)



Brass Male Union for 3/16
Brass Male Connector Ref: ZZHU19
Brass male connector for 7/16"UNF female union nuts.

Overall length 44mm( 1.7"), hex centre 1/2" across flats

Price: 4.10 (4.92 Including VAT at 20%)




People who bought this item also bought:
1. Brass Male Union 1/4" Pipe (Ref: ZZHU14)
2. Brass Female Union for 1/4" Pipe (Ref: ZZHU04A)
Brass Male Connector
Brass Female Connector Ref: ZZHU20
Brass female connector for 2x 3/8"UNFx24TPI male unions. 9/16"AF spanner size, overall length 33mm(1.3")

Price: 3.20 (3.84 Including VAT at 20%)




People who bought this item also bought:
1. Brass 'T' Piece for 3/16" Pipes (Ref: ZZHU30)
2. Pack of 10 Male Unions for 3/16" Pipe (Ref: ZZHU0110)
3. 25' Roll of Kunifer Brake Pipe (Ref: zzcnf316300)
Brass Female Connector
Brass Female Connector Ref: ZZHU21
Brass female connector for 2x M10 x 1mm male unions. 14mm spanner size, overall length 29mm(1.1")

Price: 3.20 (3.84 Including VAT at 20%)



Brass Female Connector
Brass Male Connector Ref: ZZHU22
Brass male connector for 2x M10 x 1mm female unions. 11mm AF spanner size, overall length 33.5mm(1.3")

Price: 3.20 (3.84 Including VAT at 20%)



Brass Male Connector
Brass 'T' Piece for 3/16" Pipes Ref: ZZHU30
Brass T peice threaded 3/8"UNF to take male connectors. Similar to T peice on Series 2 and Series 3 models with imperial fittings. Mounting hole 1/4" diameter.

Approximate dimensions: 38.5mm(1.5") x 34mm(1.3") x 16mm(0.625")

Price: 8.00 (9.60 Including VAT at 20%)




People who bought this item also bought:
1. Brass Female Connector (Ref: ZZHU20)
2. Pack of 10 Male Unions for 3/16" Pipe (Ref: ZZHU0110)
3. 25' Roll of Kunifer Brake Pipe (Ref: zzcnf316300)
Brass 'T' Piece for 3/16
Brass 'T' Piece for 1/4" Pipes Ref: ZZHU34
Brass T peice threaded 7/16"UNF to take male connectors. Similar to 219827 T peice on Series 1 80" models.

Approximate dimensions: 34mm(1.3") x 35.4mm(1.4") x 16mm(0.625")

Price: 9.64 (11.57 Including VAT at 20%)




People who bought this item also bought:
1. S1 86/88" Brake Pipe Set LHD (Ref: ZZGL5608)
2. Rubber Peg for Wiper Blade (Ref: ZZB00100)
3. Exhaust Mounting Bracket Assembly (Ref: BRKT3)
Brass 'T' Piece for 1/4
1litre Bottle of Silicon Brake Fluid Ref: ZZDYNSILIDOT5
Application: All Landrover models.

Description: Dynolite's performance silicone Dot5 (dot 5) Brake Fluid repels moisture so, unlike standard polyglycol brake fluid, it never needs changing. Rust and corrosion are inhibited because moisture is kept out of the system and the high boiling point of 260 degrees C is maintained throughout the life of the product therefore ensuring consistent, safe performance. Thanks to this, Dynolite silicone brake fluid lasts the lifetime of your vehicle, never needing to be changed. It will also not damage your paintwork if spilled and will not easily catch fire in the event of an accident. Pure silicone brake fluid will essentially eliminate wear snd corrosion in the hydraulic system.
It is ideal for use in vehicles that are only used occasionally where otherwise water absorbtion into the brake fluid is a major problem.

Price: 25.96 (31.15 Including VAT at 20%)




People who bought this item also bought:
1. 86/88" Brake Pipe Set RHD (Ref: ZZGB5608)
2. Pair of Gearbox Mounts for Series 1 (Ref: S1GBOXMNTS)
3. Oil Seal Differential Pinion (Ref: FRC4586)
1litre Bottle of Silicon Brake Fluid
Mini Tube Cutter Ref: ZZLAS2160
Application: Universal.

Description: Cujts hard wall pipe from 3mm(1/8") diameter to 16mm(5/8") diameter. Ideal for brake pipe.

Approximate dimensions: 49mm(1.9") x 34mm(1.3") x 21mm(0.8").

Price: 4.90 (5.88 Including VAT at 20%)



Mini Tube Cutter
Page:   <<   <  1  2  3  4   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Outer Pinion Bearing

Outer Pinion Bearing

10.72

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for outer end of differential pinion gear. Timken bearing numbers HM88046/HM88010

Approximate dimensions: Outside diameter 2.7"(68.5mm), inside diameter 1.25"(31.8mm)., height 0.93"(23.5mm).


find out more

Inner Pinion Bearing - Differential

Inner Pinion Bearing - Differential

21.70

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for inner end of differential pinion gear. Timken bearing numbers HM801346X/HM801310

Approximate dimensions: Outside diameter 3.25"(82.5mm), inside diameter 1.5"(38mm)., height 1.22"(31mm).

find out more

Seal Kir for 1 1/8" Wheel Cylinders

Seal Kir for 1 1/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for rear wheel cylinders with bore of 1 1/8"(28.5mm). Kit has sufficient seals for both front wheel cylinders.

find out more

Seal Kit for 1 3/8" Wheel Cylinders

Seal Kit for 1 3/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for front wheel cyliders with bore of 1 3/8"(35mm). Kit has sufficient seals for both front wheel cylinders.


find out more

Outlet Nozzle - SU Fuel Pump

Outlet Nozzle - SU Fuel Pump

4.44

Application: Series 1 and early Series 2 models.

Description: Nozzle for outlet of SU fuel pumps. Allows push-on fuel hose connection to pump.

Approximate dimensions: Thread diameter 22mm(0.87"), nozzle diameter 7mm(0.28").

find out more

Wiper Arm Series 3 RH

Wiper Arm Series 3 RH

24.25

Application: Series3 models.

Description: Right hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -