Digital Dispensary

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Seal Kit for Brake Master Cylinder

Seal Kit for Brake Master Cylinder

19.80

Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524
find out more

Anchor Plate for 10inch brake shoes

Anchor Plate for 10inch brake shoes

8.44

Anchor plate for use with 10inch brakes - see kit above. One anchor plate is used with each pair of shoes. These do not need replacing with every change of brake shoes, but they do become worn over several years use. Sold singly.
Approximate dimensions: 78mm x 45mm x 5mm.

Application: see STC2796DKIT above.
find out more

Locking Tool - Fuel Injection Pump Sprocket

Locking Tool - Fuel Injection Pump Sprocket

9.90

Application: Defender 2007 to 2016 with Puma TDCi engine.

Description: Tool to lock sprocket of injection pump in position.

Approximate dimensions: Overall diameter 115mm(4.5"), inside diameter 69mm(2.7"), height 22mm(0.9").

find out more

Sundry Sale £00.01

0.01


find out more

Washer - Shock Absorber Fixing

Washer - Shock Absorber Fixing

0.56

Application: Series 2A and Series 3.

Description: Washer for retaining top of shock absorbers. Used with NRC7064 and 253826.

Approximate dimensions: Outside diameter 41mm(1.6"), inside diameter 12mm(0.47"), thickness 2.8mm(0.11").

find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Washer Shock Absorber Bush

Washer Shock Absorber Bush

0.30

Application: Series 1, Series 2 and Series 3 shock absorbers. Defender, Discovery 1 and Range Rover Classic anti-roll bar links.

Description: Replacement washer for retaining shock absorber to spring bottom plate.

Approximate dimensions: overall diameter 41mm(1 5/8"), inside diameter 21.5mm(0.85"), thickness 3.2mm(1/8").

Old part number: 264024

find out more

Split Pin - Shocker Retention

Split Pin - Shocker Retention

0.25

Application: Series 1, Series 2 and Series 3.

Description: Replacement split pin for retaining shock absorber to bottom plate of spring.

Approximate dimensions: Overall length 55.5mm(2.2"), diameter 6mm(0.24")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:  1  2   >   >>
24v 75/70w Headlamp Bulb type LLB475 Ref: GLB475
24volt 75/70watt dual filament halogen H4 headlamp bulb with P43t cap.
Dimensions are in millimetres.

Price: 4.28 (5.14 Including VAT at 20%)



24v 75/70w Headlamp  Bulb type LLB475
24v 70w Halogen Spot Bulb type LLB460 Ref: GLB460a
24volt 70watt halogen H3 spot lamp bulb.
Typical application: spot lamp, working lamp.
Dimensions are in millimetres.

Price: 1.75 (2.10 Including VAT at 20%)



24v 70w Halogen Spot Bulb type LLB460
24v 55/50w Headlamp Bulb type LLB429 Ref: 547023
24volt 55/50watt headlamp bulb R2 ASY.
Dimensions are in millimetres.

Price: 2.50 (3.00 Including VAT at 20%)



24v 55/50w Headlamp Bulb type LLB429
24v 24/6w Bulb type LLB334 Ref: 510817
24volt 24/6watt dual filament bulb type OSP with BAY15d cap.
Typical application: stop/tail.
Dimensions are in millimetres.

Price: 0.95 (1.14 Including VAT at 20%)



24v 24/6w Bulb type LLB334
24v 21w Bulb type LLB241 Ref: 589973
21watt, 24volt bulb type LLB241. P21W SCC cap BA15s,
Typical application: indicator lamp.
Dimensions are in millimetres

Price: 0.90 (1.08 Including VAT at 20%)



24v 21w Bulb type LLB241
24v 5w Bulb type LLB149 Ref: STC3065
24volt 5watt R5W single contact bulb. Cap BA15s.
Typical application: side lamp.
Dimensions are in millimetres

Price: 0.95 (1.14 Including VAT at 20%)



24v 5w Bulb type LLB149
24v 5w Bulb type LLB227 Ref: 547136
24volt 5watt type MCC with BA9s cap.
Typical application: sode light.
Dimensions are in millimetres.

Price: 0.60 (0.72 Including VAT at 20%)



24v 5w Bulb type LLB227
24v 5w Capless Bulb type LLB507 Ref: RTC6089
24volt 5watt capless bulb.
Typical application; sidelamp.
Dimensions are in millimetres.

Price: 0.75 (0.90 Including VAT at 20%)



24v 5w Capless Bulb type LLB507
24v 3w Bulb type LLB283 Ref: 575221
24volt 3watt peanut bulb. Cap BA7s.
Typical application: panel lamp.
Dimensions are in millimetres.

Price: 0.75 (0.90 Including VAT at 20%)



24v 3w Bulb type LLB283
24v 2.8w Bulb Ttype LLB650 Ref: 500918
24volt 2.8watt bulb with minature edison screw cap.
Typical application: panel lamp bulb.
Dimensions are in millimetres.

Price: 0.75 (0.90 Including VAT at 20%)



24v 2.8w Bulb Ttype LLB650
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -