Digital Dispensary

Product Sections


Best Sellers

Gasket Set for Solex 32PBI-2 Carburettor

Gasket Set for Solex 32PBI-2 Carburettor

7.66

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor.
Description: Set of 6 gaskets and 8 fibre washers for this carburettor
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Differential Pinion

Oil Seal Differential Pinion

5.21

Application: Series 1, 2 & 3 Rover type differentials.

Description: Oil seal to nose of differential. Corteco/Gaco boxed.

Approximate dimensions: outside diameter 70mm (2.76"), thickness 12.5mm (0.5").

Original part number: 217507.
find out more

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Gasket for Differential to Axle Casing

Gasket for Differential to Axle Casing

0.60

Application: Rover type differentials on Series 1, 2 & 3. Range Rover Classic, Defender and Discovery 1.
Description: replacement gasket for differential assembly to axle casing.
Approximate dimensions: overall diameter 24.4cm (9.6")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > DEFENDER Parts > Defender Engine Parts > 2.5 Diesels Naturally Aspirated and Turbo
Page:   <<   <  1  2
Oil Pump Assembly Ref: ERR1117D
Application: Series 2A and Series 3 four cylinder engines, Defender 2.25 petrol, 2.5 petrol, 2.5 diesel and 2.5 turbo diesel.

Description: Replacement high volume oil pump.

Price: 39.05 (46.86 Including VAT at 20%)



Oil Pump Assembly
Oli Pressure Switch Ref: PRC6387
Application: 2.25 petrol, 2.5 petrol, 2.5 diesel, 2.5 turbo diesel, 200Tdi and VM diesel.

Description: Oil pressure switch by Intermotor. Supplied with sealing washer.

Approximate dimensions: Hexagon is 22mm(0.87") across flats, overall length is 54mm(2.13"), thread is M10 fine.

Previous part numbers: GPS127, PRC4044

Price: 2.95 (3.54 Including VAT at 20%)



Oli Pressure Switch
Spigot Bush Ref: LFB500050
Application: All 4 and 6 cylinder engines fitted to Series 1, 2 & 3. Also 200 & 300TDi fitted to Defender, Discovery 1 and Range Rover Classic. Also TD5 models. In addition Series 1, 2 and 3 transfer box.

Description: Bronze bush fitted to rear of crankshaft to take nose of first motion shaft of gearbox. Also used as bush between front output shaft and rear output shaft in Series transfer boxes (not 109V8).
Original part number 8566 and 8566L.

Approximate dimensions: Outside diameter 1 1/16"(27mm), inside diameter 7/8"(22mm), length 0.84"(21.4mm)

Price: 1.21 (1.45 Including VAT at 20%)




People who bought this item also bought:
1. Timing Chain - AE boxed (Ref: ETC4499)
2. Oil Seal between Crankshaft and Front Cover (Ref: ERR6490)
3. Exhaust Mounting Bracket Assembly (Ref: BRKT3)
Spigot Bush
Engine Mount Ref: ANR1808
Application: Defender with any of the following enges - 2.25 Petrol, 2.5 Petrol, 2.5 Diesel or 2.5 Turbo Diesel.

Description: OEM sourced engine mount comprising of 3 steel discs separated by rubber discs.

Approximate dimensions: Overall diameter 76mm(3"), overall length 77mm(3.03"), studs are threaded M10.

Previous Part Nember: NRC9560.

Price: 4.00 (4.80 Including VAT at 20%)



Engine Mount
Replacement Water Pump for Defender Ref: STC635D
Replacement water pump for Defender, supplied with gasket.

Application: 2.5 litre diesel and 2.5 litre petrol with air con and A127 alternator. 2.5 diesel turbo standard and air con versions.

Approximate dimensions: 29cm x 15cm, spindle height 13cm

Price: 35.00 (42.00 Including VAT at 20%)



Replacement Water Pump  for Defender
Replacement Viscous Unit 2.5Dt & 200TDi Ref: ETC7238=
Replacement viscous unit.

Application: Defender 2.5DT UK & Europe, 200TDI UK & Europe in Defender, Discovery and Classic Range Rover.

Approximate dimensions: overall diameter 15cm, height 5.7cm, left hand thread mounting nut 32mm across flats.

Price: 56.25 (67.50 Including VAT at 20%)



Replacement Viscous Unit 2.5Dt & 200TDi
Thermostat 82 degrees Ref: 602687
Application: Series 1 1.6ltr & 2.0ltr petrol engines, Defender 2.5 & 2.5TD diesel engines.

Description: Waxstat 82degree thermostat.

Original part number: 504560.

Price: 8.84 (10.61 Including VAT at 20%)




People who bought this item also bought:
1. Spigot Bush (Ref: LFB500050)
2. Timing Chain - AE boxed (Ref: ETC4499)
3. Oil Seal between Crankshaft and Front Cover (Ref: ERR6490)
Thermostat 82 degrees
Pump - Power Steering Ref: ETC9077
Application: Defender with 2.25 Petrol, 2.5 petrol, 2.5 diesel (to VIN FA), 2.5 Turbo diesel early.

Description: OEM power steering pump. Output via banjo connector to rear, input via 16mm(5/8") spout to side. Takes 3 bolt (M8) pulley, and has 4c M6 mounting holes.

Approximate dimensions: Overall length 155mm(6.1"), body diameter 91mm(3.6").

Price: 164.62 (197.54 Including VAT at 20%)



Pump - Power Steering
Tensioner for Power Steering Belt Ref: ETC4153
Application: Defender 2.25 petrol, 2.5 petrol and 2.5 diesel engines.

Description: Tensioner pulley and arm for the power steering belt.

Approximate dimensions: Pulley outside diameter 84mm(3.3"), arm centres 55mm(2.2")

Price: 45.00 (54.00 Including VAT at 20%)



Tensioner for Power Steering Belt
Engine Breather-Filter Ref: ERR737D
Application: Defender with 2.5litre naturally aspirated diesel engine.

Description: Breather cap on top of rocker cover with single pipe outlet of 19mm diameter.

Price: 18.91 (22.69 Including VAT at 20%)



Engine Breather-Filter
Digital Dispensary > DEFENDER Parts > Defender Engine Parts > 2.5 Diesels Naturally Aspirated and Turbo
Page:   <<   <  1  2

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Outer Pinion Bearing

Outer Pinion Bearing

10.72

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for outer end of differential pinion gear. Timken bearing numbers HM88046/HM88010

Approximate dimensions: Outside diameter 2.7"(68.5mm), inside diameter 1.25"(31.8mm)., height 0.93"(23.5mm).


find out more

Inner Pinion Bearing - Differential

Inner Pinion Bearing - Differential

21.70

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for inner end of differential pinion gear. Timken bearing numbers HM801346X/HM801310

Approximate dimensions: Outside diameter 3.25"(82.5mm), inside diameter 1.5"(38mm)., height 1.22"(31mm).

find out more

Seal Kir for 1 1/8" Wheel Cylinders

Seal Kir for 1 1/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for rear wheel cylinders with bore of 1 1/8"(28.5mm). Kit has sufficient seals for both front wheel cylinders.

find out more

Seal Kit for 1 3/8" Wheel Cylinders

Seal Kit for 1 3/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for front wheel cyliders with bore of 1 3/8"(35mm). Kit has sufficient seals for both front wheel cylinders.


find out more

Outlet Nozzle - SU Fuel Pump

Outlet Nozzle - SU Fuel Pump

4.44

Application: Series 1 and early Series 2 models.

Description: Nozzle for outlet of SU fuel pumps. Allows push-on fuel hose connection to pump.

Approximate dimensions: Thread diameter 22mm(0.87"), nozzle diameter 7mm(0.28").

find out more

Wiper Arm Series 3 RH

Wiper Arm Series 3 RH

24.25

Application: Series3 models.

Description: Right hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -